Filter News
Area of Research
- (-) Building Technologies (12)
- (-) Chemical and Engineering Materials (4)
- (-) Fuel Cycle Science and Technology (3)
- Advanced Manufacturing (34)
- Biological Systems (18)
- Biology and Environment (177)
- Biology and Soft Matter (5)
- Chemistry and Physics at Interfaces (11)
- Clean Energy (522)
- Climate and Environmental Systems (14)
- Computational Biology (6)
- Computational Chemistry (5)
- Computational Engineering (5)
- Computer Science (19)
- Data (1)
- Earth Sciences (1)
- Electricity and Smart Grid (3)
- Energy Frontier Research Centers (14)
- Energy Sciences (5)
- Fossil Energy (3)
- Functional Materials for Energy (16)
- Fusion and Fission (54)
- Fusion Energy (17)
- Geographic Information Science and Technology (3)
- Isotope Development and Production (3)
- Isotopes (35)
- Materials (433)
- Materials Characterization (2)
- Materials for Computing (36)
- Materials Synthesis from Atoms to Systems (13)
- Materials Under Extremes (12)
- Mathematics (1)
- National Security (79)
- Neutron Data Analysis and Visualization (4)
- Neutron Science (190)
- Nuclear Science and Technology (74)
- Nuclear Systems Modeling, Simulation and Validation (3)
- Nuclear Systems Technology (1)
- Quantum Condensed Matter (4)
- Quantum information Science (9)
- Reactor Technology (1)
- Renewable Energy (4)
- Sensors and Controls (5)
- Supercomputing (311)
- Transportation Systems (11)
Media Contacts
![ORNL retiree Duane Starr and his wife, Nancy, pose with the critical frequencies demo unit Duane designed, built and donated to the laboratory to support nuclear workshops. Credit: Carlos Jones/ORNL, Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2023-12/2023-P06566.jpg?h=036a71b7&itok=tIETe2jc)
For years, Duane Starr led workshops at ORNL to help others from across the U.S. government understand uranium processing technologies. After his retirement, Starr donated a 5-foot-tall working model, built in his garage, that demonstrates vibration harmonics, consistent with operation of a super critical gas centrifuge rotor, a valuable resource to ongoing ORNL-led workshops.
![ORNL and Enginuity researchers proved that a micro combined heat and power prototype, or mCHP, with an opposed piston engine can achieve more than 93% overall energy efficiency. The environmentally friendly mCHP can replace a back-up generator or traditional hot water heater. Credit: ORNL, U.S. Department of Energy](/sites/default/files/styles/list_page_thumbnail/public/2023-06/storytipjb.png?h=ddb1ad0c&itok=0ZTdSit5)
ORNL researchers, in collaboration with Enginuity Power Systems, demonstrated that a micro combined heat and power prototype, or mCHP, with a piston engine can achieve an overall energy efficiency greater than 93%.
![Oak Ridge National Laboratory researchers developed a device called a piezoelectric-driven magnetic actuator, or PEDMA, that can be inserted into the header of a microchannel heat exchanger to keep refrigerants flowing evenly and the HVAC unit running efficiently. Credit: ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2022-08/device-crop.jpg?h=e15d4061&itok=cUDKnYCj)
Oak Ridge National Laboratory researchers demonstrated that microchannel heat exchangers in heating, ventilation and air conditioning units can keep refrigerants evenly and continually distributed by inserting a device called a piezoelectric-driven
![Caption: ORNL researchers demonstrated a system that can detect propane leaks within seconds and notify emergency services immediately, well before flames ignite. Credit: ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2022-06/sensor.jpg?h=56a028f0&itok=MzSoh0Xg)
Oak Ridge National Laboratory researchers demonstrated that an electrochemical sensor paired with a transmitter not only detects propane leaks within seconds, but it can also send a signal to alert emergency services.
![An algorithm developed and field-tested by ORNL researchers uses machine learning to maintain homeowners’ preferred temperatures year-round while minimizing energy costs. Credit: ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-07/2019-P07408_2.jpg?h=8f9cfe54&itok=jBvKdqIv)
Oak Ridge National Laboratory researchers designed and field-tested an algorithm that could help homeowners maintain comfortable temperatures year-round while minimizing utility costs.
![Buildings—Reaching the boiling point](/sites/default/files/styles/list_page_thumbnail/public/2019-10/Open_cell_metal_foam_ORNL.jpg?h=6e4c3ffa&itok=EvkucSnf)
Researchers at Oak Ridge National Laboratory demonstrated that metal foam enhances the evaporation process in thermal conversion systems and enables the development of compact HVAC&R units.
![Oak Ridge National Laboratory has signed a memorandum of understanding with the United Kingdom’s National Nuclear Laboratory to partner on various nuclear research and development efforts. Oak Ridge National Laboratory has signed a memorandum of understanding with the United Kingdom’s National Nuclear Laboratory to partner on various nuclear research and development efforts.](/sites/default/files/styles/list_page_thumbnail/public/NNL_MainImage.jpg?itok=8cSrtngA)
The United Kingdom’s National Nuclear Laboratory and the U.S. Department of Energy’s Oak Ridge National Laboratory have agreed to cooperate on a wide range of nuclear energy research and development efforts that leverage both organizations’ unique expertise and capabilities.
![Buildings-Inside_out.jpg Buildings-Inside_out.jpg](/sites/default/files/styles/list_page_thumbnail/public/Buildings-Inside_out.jpg?itok=Uq71eFNm)
Vacuum insulation technology called modified atmosphere insulation, or MAI, could be a viable solution for improving the energy performance of buildings, based on a study by Oak Ridge National Laboratory and industry partners.
![Researchers 3D printed molds for precasting concrete using the Big Area Additive Manufacturing, or BAAM™, system at DOE’s Manufacturing Demonstration Facility at ORNL. Complex, durable mold designs can be produced in less time than traditional wood or fib Researchers 3D printed molds for precasting concrete using the Big Area Additive Manufacturing, or BAAM™, system at DOE’s Manufacturing Demonstration Facility at ORNL. Complex, durable mold designs can be produced in less time than traditional wood or fib](/sites/default/files/styles/list_page_thumbnail/public/news/images/02%20-%203D-printed_precast_concrete_molds.gif?itok=nni1l9l2)
The construction industry may soon benefit from 3D printed molds to make concrete facades, promising lower cost and production time. Researchers at Oak Ridge National Laboratory are evaluating the performance of 3D printed molds used to precast concrete facades in a 42-story buildin...
![Oak Ridge National Laboratory's Additive Manufacturing Integrated Energy (AMIE) demonstration connects a 3D-printed building and vehicle to showcase a new approach to energy use, storage and consumption. Photo by Carlos Jones Oak Ridge National Laboratory's Additive Manufacturing Integrated Energy (AMIE) demonstration connects a 3D-printed building and vehicle to showcase a new approach to energy use, storage and consumption. Photo by Carlos Jones](/sites/default/files/styles/list_page_thumbnail/public/news/images/_SJ_7017R.jpg?itok=zTjkeIHs)
A research demonstration unveiled today at the Department of Energy’s Oak Ridge National Laboratory combines clean energy technologies into a 3D-printed building and vehicle to showcase a new approach to energy use, storage and consumption. The Additive Manufactur...