61 - 70 of 105 Results
Demand for lithium is expected to increase drastically due to the use of rechargeable lithium-ion batteries used in portable electronics and electric vehicles. An efficient method to extract lithium is necessary to help meet this demand.
Separation of rare earth containing ores is often approached via froth floatation; however, for successful flotation, ligands must be designed that can both bind to the mineral interface while being amphiphilic enough to drag the minerals to an air-aqueous interface.
High strength, oxidation resistant refractory alloys are difficult to fabricate for commercial use in extreme environments.
Commercial closed-cell insulation foam boards reduce their thermal resistivity by up to 30% due to gas diffusion in and out of foam cells.
Most plastic is discarded after a single use, with about 76 percent of plastic waste discarded into landfills annually. The current practice is wasting feedstock resources, energy, and carbon used for their production.
Technetium is a radioactive isotope that is a byproduct of nuclear processing; there are currently limited mechanisms to capture technetium when uranium is recycled, hindering the efficient recycling of spent nuclear fuel.
Adhesives for metal parts typically are liquid-based which require complex processing. This technology is a hot melt adhesive that is mixed and applied in a solid form and after the heating and cooling cycle creates strong bonds with the substrates in a matter of seconds.
The co-processing of cathode and composite electrolyte for solid state polymer batteries has been developed. A traditional uncalendared cathode of e.g.