Marie Romedenne R&D Staff Contact 865.341.0010 | romedennem@ornl.gov All Publications Evaluation of liquid metal embrittlement of F82H and 4340 steels in liquid lithium Exploring Fission–Fusion Synergies to Accelerate Compatibility Understanding Exploring Fission-Fusion Synergies to Accelerate Compatibility Understanding Liquid metal compatibility of pre-oxidized FeCrAl in flowing Sn UO2-Liquid Metal Suspension Fuel Concept: Alloy Selection and Depletion Calculations THE IMPACT OF OXIDATION-INDUCED DEGRADATION ON MATERIALS USED IN HYDROGEN-FIRED MICROTURBINES The Impact of Oxidation-Induced Degradation On Materials Used in Hydrogen-Fired Microturbines Oxidation Behavior of Heat-Resistant Type HK Steel (HK30Nb) at 800 °C Revealing the elusive role of water vapor in the oxidation behavior of a Mn-Si containing NiCr alloy at 950 °C The Effect of Higher Water Vapor Content in H2-Fired Turbines on High Temperature Durability... Evaluation of the interaction between SiC, pre-oxidized FeCrAlMo with aluminized and pre-oxidized Fe-8Cr-2W in flowing PbLi Cyclic oxidation behavior of selected commercial NiCr-alloys for engine exhaust valves in wet air environment between 800 and 950 °C Compatibility of Fe-Cr-Al and Fe-Cr-Al-Mo oxide dispersion strengthened steels with static liquid sodium at 700 ° C Oxidation Lifetime Modeling of 625 and 120 Foils After Long-term Exposure in Flowing Air + 10% H2O at 700 and 800 ∘C Isothermal and Cyclic Oxidation of Haynes 282 Processed by Electron Beam Melting (EBM) and Laser Powder Bed Fusion (LPBF) in ... Development of an Open-source Alloy selection and Lifetime assessment tool for structural components in CSP Lessons Learned in Employing Data Analytics to Predict Oxidation Kinetics and Spallation Behavior of High-Temperature NiCr-Based Alloys Data analytics approach to predict high-temperature cyclic oxidation kinetics of NiCr-based Alloys Effect of Water Vapor on Lifetime of 625 and 120 Foils During Oxidation Between 650 and 800 °C Compatibility of SiC with ODS FeCrAl in flowing Pb-Li at 600°–700 °C... High Temperature Oxidation Behavior of Fe- and Ni-Based Alloy Foils in Water Vapor at 850 °C Oxidation Behavior of Candidate NiCr Alloys for Engine Exhaust Valves: Part I—Effect of Minor Alloying Elements Quantitatively Accounting for the Effects of Surface Topography on the Oxidation Kinetics of Additive Manufactured Hastelloy X Processed by Electron Beam Melting High temperature air oxidation behavior of Hastelloy X processed by Electron Beam Melting (EBM) and Selective Laser Melting (SLM) Carburization of austenitic and ferritic stainless steels in liquid sodium: Comparison between experimental observations and simulations Key Links Curriculum Vitae Google Scholar Web of Science ORCID LinkedIn IMPACT@ORNL Researchgate Profile Organizations Physical Sciences Directorate Materials Science and Technology Division Materials in Extremes Section Corrosion Science and Technology Group
