News

In this artist’s conception of the process, an automated deposition system places a new material onto a base material (purple beam, right) as the last sample that was made is analyzed and sent to the AI (green beams, brain, left). The AI tells the pulsed laser deposition machine what to do next (data cable, bottom).
Researchers harness AI for autonomous discovery and optimization of materials
Students gather at a poster session
Students acquire skills at Quantum Science Center
Rectangular box being lifted by a red pully system up the left side of the building
Researchers make ‘green’ floor to replace steel

Filter News

Area of Research

News Type

Date

News Topics

Media Contacts

Connect with ORNL

2023 Battelle Distinguished Inventors

Four scientists receive Battelle Distinguished Inventor recognition

Four scientists affiliated with ORNL were named Battelle Distinguished Inventors during the lab’s annual Innovation Awards on Dec. 1 in recognition of being granted 14 or more United States patents.

SM2ART team members receive the CAMX Combined Strength Award at the Georgia World Congress Center in Atlanta. Pictured here are, from left, ORNL’s Dan Coughlin, Sana Elyas, Halil Tekinalp, Amber Hubbard, Soydan Ozcan; University of Maine’s Susan MacKay, Angelina Buzzelli, Scott Tomlinson, Wesley Bisson; and ORNL’s Matt Korey and Vlastimil Kunc. Credit: University of Maine

BioHome3D team wins CAMX Combined Strength Award

The Hub & Spoke Sustainable Materials & Manufacturing Alliance for Renewable Technologies, or SM2ART, program has been honored with the composites industry’s Combined Strength Award at the Composites and Advanced Materials Expo, or CAMX, 2023 in Atlanta. This distinction goes to the team that applies their knowledge, resources and talent to solve a problem by making the best use of composites materials.

ORNL Composites Innovation staff members David Nuttall, left, and Vipin Kumar use additive manufacturing compression molding to produce a composite-based finished part in minutes. AMCM technology could accelerate decarbonization of the automobile and aerospace industries. Credit: ORNL, U.S. Dept. of Energy

‘Cradle to cradle’ research expands composites’ 3D-printing possibilities

Researchers at ORNL are extending the boundaries of composite-based materials used in additive manufacturing, or AM. ORNL is working with industrial partners who are exploring AM, also known as 3D printing, as a path to higher production levels and fewer supply chain interruptions.

The sun sets behind the ORNL Visitor Center in this aerial photo from April 2023. Credit: Kase Clapp/ORNL, U.S. Dept. of Energy

ORNL projects receive $8M from DOE Technology Commercialization Fund in FY23

In fiscal year 2023 — Oct. 1–Sept. 30, 2023 — Oak Ridge National Laboratory was awarded more than $8 million in technology maturation funding through the Department of Energy’s Technology Commercialization Fund, or TCF.

Researchers at Oak Ridge National Laboratory developed an eco-friendly foam insulation for improved building efficiency. Credit: Chad Malone/ORNL, U.S. Dept. of Energy

Eco-friendly foam insulates buildings without warming the globe

Scientists at ORNL developed a competitive, eco-friendly alternative made without harmful blowing agents.

Ten scientists from the Department of Energy’s Oak Ridge National Laboratory are among the world’s most highly cited researchers. Credit: ORNL, U.S. Dept. of Energy

Ten ORNL scientists among world’s most highly cited researchers

Ten scientists from the Department of Energy’s Oak Ridge National Laboratory are among the world’s most highly cited researchers, according to a bibliometric analysis conducted by the scientific publication analytics firm Clarivate.

Oak Ridge National Laboratory scientist Tomonori Saito shows a 3D-printed sandcastle at the DOE Manufacturing Demonstration Facility at ORNL. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy

Polymer discovery gives 3D-printed sand super strength

Researchers at ORNL designed a novel polymer to bind and strengthen silica sand for binder jet additive manufacturing, a 3D-printing method used by industries for prototyping and part production.

A new tool that simulates the energy profile of every building in America will give homeowners, utilities and companies a quick way to determine energy use and cost-effective retrofits that can reduce energy and carbon emissions.

ORNL’s simulation tool creates digital twin of buildings from coast to coast

A new tool that simulates the energy profile of every building in America will give homeowners, utilities and companies a quick way to determine energy use and cost-effective retrofits that can reduce energy and carbon emissions.

A 3D printed thermal protection shield, produced by ORNL researchers for NASA, is part of a cargo spacecraft bound for the International Space Station. The shield was printed at the Department of Energy’s Manufacturing Demonstration Facility at ORNL. Credit: ORNL, U.S. Dept. of Energy

Manufacturing – To infinity and beyond

A research team at Oak Ridge National Laboratory have 3D printed a thermal protection shield, or TPS, for a capsule that will launch with the Cygnus cargo spacecraft as part of the supply mission to the International Space Station.

Aviation contributes about 2.5% of global carbon dioxide emissions. To greatly reduce its emissions, the U.S. commercial aviation sector needs new methods of making sustainable aviation fuel. Credit: Ross Parmly/Unsplash 

Novel composite catalyst holds promise for cost-effective ethanol-to-jet-fuel conversion

ORNL’s Zhenglong Li led a team tasked with improving the current technique for converting ethanol to C3+ olefins and demonstrated a unique composite catalyst that upends current practice and drives down costs. The research was published in ACS Catalysis.