Skip to main content
Rectangular box being lifted by a red pully system up the left side of the building

Researchers at ORNL and the University of Maine have designed and 3D-printed a single-piece, recyclable natural-material floor panel tested to be strong enough to replace construction materials like steel. 

Two green oak leaves with other matter in two circles above them. To the right, a yellow blob. To the left, a brown material inside a bowl.

Oak Ridge National Laboratory scientists ingeniously created a sustainable, soft material by combining rubber with woody reinforcements and incorporating “smart” linkages between the components that unlock on demand.

Green, two-story house is being assembled with the help of a yellow crane.

Building innovations from ORNL will be on display in Washington, D.C. on the National Mall June 7 to June 9, 2024, during the U.S. Department of Housing and Urban Development’s Innovation Housing Showcase. For the first time, ORNL’s real-time building evaluator was demonstrated outside of a laboratory setting and deployed for building construction. 

Blue background with three rectangles. The first and third silver rectangles are showing the inside metal part of a fridge with small alternating horizontal rectangles going down the side in darker grey/silver.

A technology developed by Oak Ridge National Laboratory works to keep food refrigerated with phase change materials, or PCMs, while reducing carbon emissions by 30%.

Man in a beard holding tweezers, showing a bead if space glass closer to the screen.

Researchers set a new benchmark for future experiments making materials in space rather than for space. They discovered that many kinds of glass have similar atomic structure and arrangements and can successfully be made in space. Scientists from nine institutions in government, academia and industry participated in this 5-year study. 

ORNL researcher Felicia Gilliland loads experiment samples into position for the newly installed UR5E robotic arm at the BIO-SANS instrument. The industrial-grade robot changes samples automatically, reducing the need for human assistance and improving sample throughput. Credit: Jeremy Rumsey/ORNL, U.S. Dept. of Energy

The BIO-SANS instrument, located at Oak Ridge National Laboratory’s High Flux Isotope Reactor, is the latest neutron scattering instrument to be retrofitted with state-of-the-art robotics and custom software. The sophisticated upgrade quadruples the number of samples the instrument can measure automatically and significantly reduces the need for human assistance.

The Linac Coherent Light Source at DOE’s SLAC National Accelerator Laboratory in California reveals the structural dynamics of atoms and molecules through X-ray snapshots at ultrafast timescales. Pictured here is the LCLS-II tunnel. Credit: Jim Gensheimer/SLAC National Accelerator Laboratory

Plans to unite the capabilities of two cutting-edge technological facilities funded by the Department of Energy’s Office of Science promise to usher in a new era of dynamic structural biology. Through DOE’s Integrated Research Infrastructure, or IRI, initiative, the facilities will complement each other’s technologies in the pursuit of science despite being nearly 2,500 miles apart.

Oak Ridge National Laboratory’s Sachin Nimbalkar, left, and Thomas Wenning guide energy-saving training activities for industry during Energy Bootcamps, hosted by DOE’s Better Plants program. Credit: ORNL, U.S. Dept. of Energy

Helping hundreds of manufacturing industries and water-power facilities across the U.S. increase energy efficiency requires a balance of teaching and training, blended with scientific guidance and technical expertise. It’s a formula for success that ORNL researchers have been providing to DOE’s Better Plants Program for more than a decade.

As a chemical engineer focusing on low-carbon energy sources like hydrogen, Cheekatamarla’s research at ORNL supports the deployment of clean energy technologies in buildings and industries. Credit: Genevieve Martin/ORNL, U.S. Dept. of Energy

Cheekatamarla is a researcher in the Multifunctional Equipment Integration group with previous experience in product deployment. He is researching alternative energy sources such as hydrogen for cookstoves and his research supports the decarbonization of building technologies. 

Rigoberto Advincula has been elected to the to the AIMBE College of Fellows. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy

Rigoberto “Gobet” Advincula, a scientist with joint appointments at ORNL and the University of Tennessee, has been named a Fellow of the American Institute for Medical and Biological Engineering.