Filter News
Area of Research
- Advanced Manufacturing (22)
- Biology and Environment (61)
- Biology and Soft Matter (1)
- Building Technologies (1)
- Clean Energy (121)
- Climate and Environmental Systems (2)
- Computational Biology (1)
- Computational Engineering (2)
- Computer Science (7)
- Electricity and Smart Grid (1)
- Functional Materials for Energy (1)
- Fusion and Fission (12)
- Fusion Energy (8)
- Isotope Development and Production (1)
- Isotopes (3)
- Materials (104)
- Materials Characterization (1)
- Materials for Computing (17)
- Materials Under Extremes (1)
- Mathematics (1)
- National Security (22)
- Neutron Science (33)
- Nuclear Science and Technology (18)
- Nuclear Systems Modeling, Simulation and Validation (1)
- Supercomputing (68)
- Transportation Systems (1)
News Topics
- (-) 3-D Printing/Advanced Manufacturing (119)
- (-) Advanced Reactors (34)
- (-) Artificial Intelligence (91)
- (-) Climate Change (99)
- (-) Materials Science (138)
- (-) Molten Salt (8)
- Big Data (53)
- Bioenergy (91)
- Biology (98)
- Biomedical (58)
- Biotechnology (22)
- Buildings (57)
- Chemical Sciences (63)
- Clean Water (29)
- Composites (26)
- Computer Science (186)
- Coronavirus (46)
- Critical Materials (25)
- Cybersecurity (35)
- Decarbonization (79)
- Education (4)
- Element Discovery (1)
- Emergency (2)
- Energy Storage (108)
- Environment (194)
- Exascale Computing (37)
- Fossil Energy (5)
- Frontier (42)
- Fusion (53)
- Grid (62)
- High-Performance Computing (84)
- Hydropower (11)
- Irradiation (3)
- Isotopes (52)
- ITER (7)
- Machine Learning (47)
- Materials (143)
- Mathematics (7)
- Mercury (12)
- Microelectronics (2)
- Microscopy (51)
- Nanotechnology (60)
- National Security (60)
- Net Zero (13)
- Neutron Science (130)
- Nuclear Energy (106)
- Partnerships (42)
- Physics (59)
- Polymers (33)
- Quantum Computing (33)
- Quantum Science (68)
- Renewable Energy (2)
- Security (24)
- Simulation (46)
- Software (1)
- Space Exploration (25)
- Statistics (3)
- Summit (57)
- Sustainable Energy (125)
- Transformational Challenge Reactor (7)
- Transportation (96)
Media Contacts
![Lauren Garrison Lauren Garrison](/sites/default/files/styles/list_page_thumbnail/public/2015-P03829.jpg?itok=7aYmdo0N)
The materials inside a fusion reactor must withstand one of the most extreme environments in science, with temperatures in the thousands of degrees Celsius and a constant bombardment of neutron radiation and deuterium and tritium, isotopes of hydrogen, from the volatile plasma at th...
![Researchers 3D printed molds for precasting concrete using the Big Area Additive Manufacturing, or BAAM™, system at DOE’s Manufacturing Demonstration Facility at ORNL. Complex, durable mold designs can be produced in less time than traditional wood or fib Researchers 3D printed molds for precasting concrete using the Big Area Additive Manufacturing, or BAAM™, system at DOE’s Manufacturing Demonstration Facility at ORNL. Complex, durable mold designs can be produced in less time than traditional wood or fib](/sites/default/files/styles/list_page_thumbnail/public/news/images/02%20-%203D-printed_precast_concrete_molds.gif?itok=nni1l9l2)
The construction industry may soon benefit from 3D printed molds to make concrete facades, promising lower cost and production time. Researchers at Oak Ridge National Laboratory are evaluating the performance of 3D printed molds used to precast concrete facades in a 42-story buildin...
![3D printed permanent magnets with increased density were made from an improved mixture of materials, which could lead to longer lasting, better performing magnets for electric motors, sensors and vehicle applications. Credit: Jason Richards/Oak Ridge Nati 3D printed permanent magnets with increased density were made from an improved mixture of materials, which could lead to longer lasting, better performing magnets for electric motors, sensors and vehicle applications. Credit: Jason Richards/Oak Ridge Nati](/sites/default/files/styles/list_page_thumbnail/public/news/images/06%20-%203D-printed_permament_magnet.jpg?itok=q28pGVEm)
Oak Ridge National Laboratory scientists have improved a mixture of materials used to 3D print permanent magnets with increased density, which could yield longer lasting, better performing magnets for electric motors, sensors and vehicle applications. Building on previous research, ...
![The electromagnetic isotope separator system operates by vaporizing an element such as ruthenium into the gas phase, converting the molecules into an ion beam, and then channeling the beam through magnets to separate out the different isotopes. The electromagnetic isotope separator system operates by vaporizing an element such as ruthenium into the gas phase, converting the molecules into an ion beam, and then channeling the beam through magnets to separate out the different isotopes.](/sites/default/files/styles/list_page_thumbnail/public/6_1_17%20Ru_NF3_530uA%5B2%5D.jpg?itok=3OLnNZqa)
A tiny vial of gray powder produced at the Department of Energy’s Oak Ridge National Laboratory is the backbone of a new experiment to study the intense magnetic fields created in nuclear collisions.
![Kaushik Biswas is a mechanical engineer in the Building Envelope & Urban Systems Research Group at Oak Ridge National Laboratory. Kaushik Biswas is a mechanical engineer in the Building Envelope & Urban Systems Research Group at Oak Ridge National Laboratory.](/sites/default/files/styles/list_page_thumbnail/public/news/images/Biswas18-P00384.jpg?itok=TExEg-J7)
Inspiration often strikes in the unlikeliest of places and for Kaushik Biswas, a mechanical engineer in ORNL’s Building Envelope & Urban Systems Research Group, a moment spent enjoying entertainment led to the idea of developing self-healing vacuum panels for buildings. “I was ...
![ORNL’s new salt purification lab offers tools to make and purify the salt and perform corrosion testing, which are essential steps in qualifying molten salt reactor technologies for commercial use. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy ORNL’s new salt purification lab offers tools to make and purify the salt and perform corrosion testing, which are essential steps in qualifying molten salt reactor technologies for commercial use. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/news/images/03%20Nuclear-FLiBe_lab_preview.jpeg?itok=Aqloeg9u)
Oak Ridge National Laboratory has developed a salt purification lab to study the viability of using liquid salt that contains lithium fluoride and beryllium fluoride, known as FLiBe, to cool molten salt reactors, or MSRs. Multiple American companies developing advanced reactor technol...
![Kevin Robb, a staff scientist at the Department of Energy’s Oak Ridge National Laboratory, is taking what he learned from developing the Liquid Salt Test Loop—a key tool in deploying molten salt technology applications Kevin Robb, a staff scientist at the Department of Energy’s Oak Ridge National Laboratory, is taking what he learned from developing the Liquid Salt Test Loop—a key tool in deploying molten salt technology applications](/sites/default/files/styles/list_page_thumbnail/public/news/images/2017-P03818_1.jpg?itok=qQLLL9dH)
Thanks in large part to developing and operating a facility for testing molten salt reactor (MSR) technologies, nuclear experts at the Energy Department’s Oak Ridge National Laboratory (ORNL) are now tackling the next generation of another type of clean energy—concentrating ...
For the past six years, some 140 scientists from five institutions have traveled to the Arctic Circle and beyond to gather field data as part of the Department of Energy-sponsored NGEE Arctic project. This article gives insight into how scientists gather the measurements that inform t...
![Illustration of satellite in front of glowing orange celestial body](/sites/default/files/styles/list_page_thumbnail/public/NASA_Parker_Solar_Probe_rendering.jpg?h=90c266c4&itok=KqHQKRNt)
A shield assembly that protects an instrument measuring ion and electron fluxes for a NASA mission to touch the Sun was tested in extreme experimental environments at Oak Ridge National Laboratory—and passed with flying colors. Components aboard Parker Solar Probe, which will endure th...
![Composites scientist and engineer Vlastimil Kunc with the latest large-scale 3Dprinter at the MDF. Composites scientist and engineer Vlastimil Kunc with the latest large-scale 3Dprinter at the MDF.](/sites/default/files/styles/list_page_thumbnail/public/news/images/Kunc200.jpg?itok=Z4xuRYuR)
Vlastimil Kunc grew up in a family of scientists where his natural curiosity was encouraged—an experience that continues to drive his research today in polymer composite additive manufacturing at Oak Ridge National Laboratory. “I’ve been interested in the science of composites si...