Filter News
Area of Research
- (-) Clean Energy (184)
- Advanced Manufacturing (23)
- Biology and Environment (105)
- Biology and Soft Matter (1)
- Building Technologies (1)
- Climate and Environmental Systems (5)
- Computational Biology (1)
- Computational Engineering (1)
- Computer Science (6)
- Electricity and Smart Grid (3)
- Fuel Cycle Science and Technology (1)
- Functional Materials for Energy (2)
- Fusion and Fission (30)
- Fusion Energy (11)
- Isotope Development and Production (1)
- Isotopes (7)
- Materials (135)
- Materials Characterization (2)
- Materials for Computing (18)
- Materials Under Extremes (1)
- Mathematics (1)
- National Security (25)
- Neutron Science (105)
- Nuclear Science and Technology (39)
- Nuclear Systems Modeling, Simulation and Validation (1)
- Quantum information Science (9)
- Sensors and Controls (1)
- Supercomputing (75)
News Topics
- (-) 3-D Printing/Advanced Manufacturing (78)
- (-) Environment (54)
- (-) Grid (40)
- (-) Materials (35)
- (-) Neutron Science (11)
- (-) Nuclear Energy (7)
- (-) Quantum Science (2)
- (-) Statistics (1)
- Advanced Reactors (6)
- Artificial Intelligence (8)
- Big Data (5)
- Bioenergy (26)
- Biology (11)
- Biomedical (6)
- Biotechnology (4)
- Buildings (36)
- Chemical Sciences (14)
- Clean Water (8)
- Climate Change (21)
- Composites (17)
- Computer Science (25)
- Coronavirus (12)
- Critical Materials (9)
- Cybersecurity (8)
- Decarbonization (33)
- Energy Storage (72)
- Exascale Computing (2)
- Fossil Energy (2)
- Frontier (2)
- Fusion (1)
- High-Performance Computing (6)
- Hydropower (2)
- Isotopes (1)
- Machine Learning (7)
- Materials Science (26)
- Mathematics (2)
- Mercury (3)
- Microelectronics (1)
- Microscopy (8)
- Molten Salt (1)
- Nanotechnology (8)
- National Security (5)
- Net Zero (3)
- Partnerships (12)
- Physics (1)
- Polymers (11)
- Renewable Energy (1)
- Security (6)
- Simulation (4)
- Space Exploration (3)
- Summit (4)
- Sustainable Energy (69)
- Transformational Challenge Reactor (3)
- Transportation (65)
Media Contacts
![Benefit breakdown, 3D printed vs. wood molds](/sites/default/files/styles/list_page_thumbnail/public/2023-09/2017-P07318%5B74%5D.jpg?h=1116cd87&itok=UNsJX4Uv)
Oak Ridge National Laboratory researchers have conducted a comprehensive life cycle, cost and carbon emissions analysis on 3D-printed molds for precast concrete and determined the method is economically beneficial compared to conventional wood molds.
![ZEISS Head of Additive Manufacturing Technology Claus Hermannstaedter, left, and ORNL Interim Associate Laboratory Director for Energy Science and Technology Rick Raines sign a licensing agreement that allows ORNL’s machine-learning algorithm, Simurgh, to be used for rapid evaluations of 3D-printed components with industrial X-ray computed tomography, or CT. Using machine learning in CT scanning is expected to reduce the time and cost of inspections of 3D-printed parts by more than ten times.](/sites/default/files/styles/list_page_thumbnail/public/2023-08/ZEISS%20signing%20handshake_0.jpg?h=c6980913&itok=4J8nVrPc)
A licensing agreement between the Department of Energy’s Oak Ridge National Laboratory and research partner ZEISS will enable industrial X-ray computed tomography, or CT, to perform rapid evaluations of 3D-printed components using ORNL’s machine
![Jonathan Harter, a technical professional in ORNL’s Engineering Science and Technology Directorate, uses a robot and other automated methods to disassemble electric vehicle batteries for recycling or reuse in the electric grid. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2023-08/2021-P06328_0.jpg?h=036a71b7&itok=elZeutaQ)
After being stabilized in an ambulance as he struggled to breathe, Jonathan Harter hit a low point. It was 2020, he was very sick with COVID-19, and his job as a lab technician at ORNL was ending along with his research funding.
![Yarom Polsky studio portrait](/sites/default/files/styles/list_page_thumbnail/public/2023-07/Yarom%20Polsky_0.jpg?h=0e6c7b49&itok=9H4BJ5Wm)
Yarom Polsky, director of the Manufacturing Science Division, or MSD, at the Department of Energy’s Oak Ridge National Laboratory, has been elected a Fellow of the American Society of Mechanical Engineers, or ASME.
![ORNL researchers found that a battery anode film, made by Navitas Systems using a dry process, was strong and flexible. These characteristics make a lithium-ion battery safer and more durable. Credit: Navitas Systems](/sites/default/files/styles/list_page_thumbnail/public/2023-07/Dry-Process%20Anode.horizontal.Navitas_0.jpg?h=86ae50b6&itok=zgdHv3Ls)
Early experiments at the Department of Energy’s Oak Ridge National Laboratory have revealed significant benefits to a dry battery manufacturing process. This eliminates the use of solvents and is more affordable, while showing promise for delivering a battery that is durable, less weighed down by inactive elements, and able to maintain a high capacity after use.
![small power module](/sites/default/files/styles/list_page_thumbnail/public/2023-06/2023-P08143_0.jpg?h=c6980913&itok=Si2ShyhX)
Researchers at the Department of Energy’s Oak Ridge National Laboratory are supporting the grid by improving its smallest building blocks: power modules that act as digital switches.
![TIP graphic](/sites/default/files/styles/list_page_thumbnail/public/2023-06/TIPbg_1200.png?h=da33fe38&itok=y7ggwHLV)
Scientist-inventors from ORNL will present seven new technologies during the Technology Innovation Showcase on Friday, July 14, from 8 a.m.–4 p.m. at the Joint Institute for Computational Sciences on ORNL’s campus.
![ORNL seismic researcher Chengping Chai placed seismic sensors on the ground at various distances from an ORNL nuclear reactor to learn whether they could detect its operating state. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2023-06/2023-P03398.jpg?h=3e43625b&itok=TXK8tthh)
Like most scientists, Chengping Chai is not content with the surface of things: He wants to probe beyond to learn what’s really going on. But in his case, he is literally building a map of the world beneath, using seismic and acoustic data that reveal when and where the earth moves.
![Experts at the Manufacturing Demonstration Facility worked with Magotteaux-Pulaski to develop a more durable composition and new 3D-printing process for abrasion-resistant materials. Credit: Magotteaux](/sites/default/files/styles/list_page_thumbnail/public/2023-06/MMC%20close%20up_0.png?h=bdc621fe&itok=HIrUiXzE)
For more than 100 years, Magotteaux has provided grinding materials and castings for the mining, cement and aggregates industries. The company, based in Belgium, began its international expansion in 1968. Its second international plant has been a critical part of the Pulaski, Tennessee, economy since 1972.
![Mali Balasubramanian made a rewarding mid-career shift to focus on studying new battery materials and systems using X-ray spectroscopy and other methods. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2023-06/Balasubramanian.portrait_0.jpg?h=c6980913&itok=pK7rBnui)
Having passed the midpoint of his career, physicist Mali Balasubramanian was part of a tight-knit team at a premier research facility for X-ray spectroscopy. But then another position opened, at ORNL— one that would take him in a new direction.