News

ORNL researcher Louise Evans is working to ensure safeguards approaches and verification technologies are integrated early in the design process of advanced reactor technologies. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy
Decades of nuclear expertise guides global nonproliferation innovation
To turn carbon dioxide, or CO2, into methanol, or CH3OH, copper (shown in yellow) on a hydride-substituted support speeds reactions mediated by hydrides and catalyzed by hydrogen atoms (shown in black) from surface-adsorbed formate, HCOO*. Credit: Yang He/ORNL, U.S. Dept. of Energy
Ion swap improves CO2-defeating catalyst
Caption: The Na-CO2 battery developed at ORNL, consisting of two electrodes in a saltwater solution, pulls atmospheric carbon dioxide into its electrochemical reaction, and releases only valuable biproducts. Credit: Andy Sproles/ORNL, U.S. Dept. of Energy
Carbon-capture batteries store renewable energy

Filter News

Area of Research

News Type

Date

News Topics

Media Contacts

Connect with ORNL

Three staff members in Oak Ridge National Laboratory’s Fusion and Fission Energy and Science Directorate (FFESD) have moved into newly established roles facilitating communication and program management with sponsors of the directorate’s Nuclear Energy and Fuel Cycle Division.

Three FFESD staff members transition to new nuclear energy engagement roles

Three staff members in ORNL’s Fusion and Fission Energy and Science Directorate have moved into newly established roles facilitating communication and program management with sponsors of the directorate’s Nuclear Energy and Fuel Cycle Division. 

Wire arc additive manufacturing allowed this robot arm at ORNL to transform metal wire into a complete steam turbine blade like those used in power plants. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy

Metal steam turbine blade shows cutting-edge potential for critical, large 3D-printed parts

Researchers at ORNL became the first to 3D-print large rotating steam turbine blades for generating energy in power plants.

2023 Battelle Distinguished Inventors

Four scientists receive Battelle Distinguished Inventor recognition

Four scientists affiliated with ORNL were named Battelle Distinguished Inventors during the lab’s annual Innovation Awards on Dec. 1 in recognition of being granted 14 or more United States patents.

SM2ART team members receive the CAMX Combined Strength Award at the Georgia World Congress Center in Atlanta. Pictured here are, from left, ORNL’s Dan Coughlin, Sana Elyas, Halil Tekinalp, Amber Hubbard, Soydan Ozcan; University of Maine’s Susan MacKay, Angelina Buzzelli, Scott Tomlinson, Wesley Bisson; and ORNL’s Matt Korey and Vlastimil Kunc. Credit: University of Maine

BioHome3D team wins CAMX Combined Strength Award

The Hub & Spoke Sustainable Materials & Manufacturing Alliance for Renewable Technologies, or SM2ART, program has been honored with the composites industry’s Combined Strength Award at the Composites and Advanced Materials Expo, or CAMX, 2023 in Atlanta. This distinction goes to the team that applies their knowledge, resources and talent to solve a problem by making the best use of composites materials.

Photo 1: Event organizers from the Nuclear Energy Fuel Cycle Division. Credit: Carol Morgan/ORNL, U.S. Dept. of Energy

Molten salt reactor technology heats up at ORNL workshop

The heat is on at this year’s Molten Salt Reactor Workshop – where top research and industry minds are melding to advance development on molten salt technology – at ORNL.   

Professional women in the IAEA’s Lise Meitner Programme 2023 cohort and supporters assembled at ORNL. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy

ORNL hosts IAEA Lise Meitner professional program for women in nuclear reactor modeling and simulation

The Department of Energy’s Oak Ridge National Laboratory hosted the second  2023 cohort of the International Atomic Energy Agency’s Lise Meitner Programme in October.

ORNL’s additive manufacturing compression molding, or AMCM, technology can produce composite-based, lightweight finished parts for airplanes, drones or vehicles in minutes and could acclerate decarbonization for the automobile and aeropsace industries. 

Speedy composite manufacturing

An Oak Ridge National Laboratory-developed advanced manufacturing technology, AMCM, was recently licensed by Orbital Composites and enables the rapid production of composite-based components, which could accelerate the decarbonization of vehicles

Benefit breakdown, 3D printed vs. wood molds

Benefit breakdown, 3D printed vs. wood molds

Oak Ridge National Laboratory researchers have conducted a comprehensive life cycle, cost and carbon emissions analysis on 3D-printed molds for precast concrete and determined the method is economically beneficial compared to conventional wood molds.

Cadet Elyse Wages, Mike Shaffer and Amanda Sandifer pose with a collected sample of air. Credit: Liz Neunsinger/ORNL, U.S. Dept. of Energy

US Air Force Academy cadet participates in ORNL-based air sampling study

Cadet Elyse Wages, a rising junior at the United States Air Force Academy, visited ORNL with one goal in mind: collect air.

ZEISS Head of Additive Manufacturing Technology Claus Hermannstaedter, left, and ORNL Interim Associate Laboratory Director for Energy Science and Technology Rick Raines sign a licensing agreement that allows ORNL’s machine-learning algorithm, Simurgh, to be used for rapid evaluations of 3D-printed components with industrial X-ray computed tomography, or CT. Using machine learning in CT scanning is expected to reduce the time and cost of inspections of 3D-printed parts by more than ten times.

ZEISS, ORNL sign licensing agreement for inspection of 3D-printed parts

A licensing agreement between the Department of Energy’s Oak Ridge National Laboratory and research partner ZEISS will enable industrial X-ray computed tomography, or CT, to perform rapid evaluations of 3D-printed components using ORNL’s machine