Filter News
Area of Research
- (-) Advanced Manufacturing (4)
- (-) Nuclear Science and Technology (5)
- Biology and Environment (9)
- Building Technologies (2)
- Clean Energy (30)
- Computer Science (2)
- Energy Sciences (1)
- Fusion and Fission (1)
- Fusion Energy (7)
- Isotopes (3)
- Materials (11)
- Materials for Computing (2)
- National Security (1)
- Nuclear Systems Modeling, Simulation and Validation (1)
- Supercomputing (4)
Media Contacts
![In a study, ORNL researchers concluded that the most direct path to plastic upcycling is through designing polymers specifically for reuse, which would allow the material to be converted into high-value products. Credit: Andy Sproles/ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-11/plasticUpcycleArt_0.jpg?h=7fe813aa&itok=wXdMZ6YJ)
Oak Ridge National Laboratory researchers determined that designing polymers specifically with upcycling in mind could reduce future plastic waste considerably and facilitate a circular economy where the material is used repeatedly.
![ORNL researchers developed a novel process for manufacturing extreme heat resistant carbon-carbon composites at a faster rate and produced fins or strakes made of the materials for testing on a U.S. Navy rocket launching with NASA. Credit: ORNL, Sandia/U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-09/NASA-rocket2_0.jpg?h=479b3cf8&itok=uTWZx_SB)
Oak Ridge National Laboratory researchers have developed a novel process to manufacture extreme heat resistant carbon-carbon composites. The performance of these materials will be tested in a U.S. Navy rocket that NASA will launch this fall.
![A 3D printed thermal protection shield, produced by ORNL researchers for NASA, is part of a cargo spacecraft bound for the International Space Station. The shield was printed at the Department of Energy’s Manufacturing Demonstration Facility at ORNL. Credit: ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-07/Sanded5.jpg?h=dce12e0c&itok=_8wzeG94)
A research team at Oak Ridge National Laboratory have 3D printed a thermal protection shield, or TPS, for a capsule that will launch with the Cygnus cargo spacecraft as part of the supply mission to the International Space Station.
![Fuel pellets sometimes degrade to a sandlike consistency and can disperse into the reactor core if a rod’s cladding bursts. ORNL researchers are studying how often this happens and what impact it has, in order to let reactors operate as long as possible without increasing risk.](/sites/default/files/styles/list_page_thumbnail/public/2020-08/X2001338_FuelFragmentation_GraphicUpdate_Bumpus_jnj-02_0.jpg?h=049a2720&itok=mzNfF2cS)
A developing method to gauge the occurrence of a nuclear reactor anomaly has the potential to save millions of dollars.
![Solid radium sulfate sits in the bottom of a flask during the recovery process. Credit: Oak Ridge National Laboratory, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2020-06/Ac227%202.jpg?h=479d286c&itok=AiNceGva)
Oak Ridge National Laboratory researchers have discovered a better way to separate actinium-227, a rare isotope essential for an FDA-approved cancer treatment.
![Nuclear – Finally, a benchmark](/sites/default/files/styles/list_page_thumbnail/public/2020-05/67051_0.jpg?h=add82d74&itok=xR-EnPtz)
In the 1960s, Oak Ridge National Laboratory's four-year Molten Salt Reactor Experiment tested the viability of liquid fuel reactors for commercial power generation. Results from that historic experiment recently became the basis for the first-ever molten salt reactor benchmark.
![Argon pellet injection text](/sites/default/files/styles/list_page_thumbnail/public/2019-11/13966_Ar_20degree_enhanced_0.jpg?h=8450e950&itok=tmff0GX_)
As scientists study approaches to best sustain a fusion reactor, a team led by Oak Ridge National Laboratory investigated injecting shattered argon pellets into a super-hot plasma, when needed, to protect the reactor’s interior wall from high-energy runaway electrons.
![Tungsten tiles for fusion](/sites/default/files/styles/list_page_thumbnail/public/2019-07/EBM-tungsten_tiles_ORNL.png?h=0c890573&itok=XgIsl0tA)
Using additive manufacturing, scientists experimenting with tungsten at Oak Ridge National Laboratory hope to unlock new potential of the high-performance heat-transferring material used to protect components from the plasma inside a fusion reactor. Fusion requires hydrogen isotopes to reach millions of degrees.
![Nuclear—Tiny testing fuels](/sites/default/files/styles/list_page_thumbnail/public/2019-05/MiniFuel_2019-P03618_0.jpg?h=49ab6177&itok=VVYMAZ3E)
For the first time, Oak Ridge National Laboratory has completed testing of nuclear fuels using MiniFuel, an irradiation vehicle that allows for rapid experimentation.