Filter News
Area of Research
- (-) Advanced Manufacturing (13)
- (-) Materials for Computing (5)
- (-) Nuclear Science and Technology (16)
- Biology and Environment (31)
- Building Technologies (1)
- Clean Energy (72)
- Climate and Environmental Systems (3)
- Computational Engineering (2)
- Computer Science (7)
- Electricity and Smart Grid (2)
- Functional Materials for Energy (1)
- Fusion and Fission (14)
- Fusion Energy (8)
- Isotopes (4)
- Materials (26)
- Mathematics (1)
- National Security (5)
- Neutron Science (8)
- Nuclear Systems Modeling, Simulation and Validation (2)
- Quantum information Science (4)
- Sensors and Controls (1)
- Supercomputing (18)
News Type
News Topics
- (-) 3-D Printing/Advanced Manufacturing (16)
- (-) Advanced Reactors (6)
- (-) Environment (2)
- (-) Fusion (3)
- (-) Molten Salt (3)
- (-) Nuclear Energy (14)
- (-) Quantum Science (1)
- (-) Space Exploration (4)
- Bioenergy (1)
- Biomedical (3)
- Chemical Sciences (2)
- Composites (3)
- Computer Science (4)
- Coronavirus (2)
- Cybersecurity (2)
- Energy Storage (1)
- Isotopes (1)
- Materials (10)
- Materials Science (14)
- Microscopy (2)
- Nanotechnology (3)
- Neutron Science (5)
- Polymers (3)
- Security (1)
- Sustainable Energy (7)
- Transportation (1)
Media Contacts
![Luiz Leal portrait](/sites/default/files/styles/list_page_thumbnail/public/2023-11/2023-P12447_0.jpg?h=036a71b7&itok=pK390n3n)
ORNL’s Luiz Leal of the Department of Energy’s Oak Ridge National Laboratory is the recipient of the 2023 Seaborg Medal from the American Nuclear Society.
![Oak Ridge National Laboratory researchers used big area additive manufacturing with metal to 3D print a steel component for a wind turbine, proving the technique as a viable alternative to conventional fabrication methods. Credit: ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2022-01/Picture1_1.jpg?h=2fa4ad28&itok=tr6lrVrr)
Oak Ridge National Laboratory researchers recently used large-scale additive manufacturing with metal to produce a full-strength steel component for a wind turbine, proving the technique as a viable alternative to
![Mars Rover 2020](/sites/default/files/styles/list_page_thumbnail/public/2019-03/Mars_0.jpg?h=c44fcfa1&itok=gSstQOJO)
More than 50 current employees and recent retirees from ORNL received Department of Energy Secretary’s Honor Awards from Secretary Jennifer Granholm in January as part of project teams spanning the national laboratory system. The annual awards recognized 21 teams and three individuals for service and contributions to DOE’s mission and to the benefit of the nation.
![ORNL researchers developed a novel process for manufacturing extreme heat resistant carbon-carbon composites at a faster rate and produced fins or strakes made of the materials for testing on a U.S. Navy rocket launching with NASA. Credit: ORNL, Sandia/U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-09/NASA-rocket2_0.jpg?h=479b3cf8&itok=uTWZx_SB)
Oak Ridge National Laboratory researchers have developed a novel process to manufacture extreme heat resistant carbon-carbon composites. The performance of these materials will be tested in a U.S. Navy rocket that NASA will launch this fall.
![A 3D printed thermal protection shield, produced by ORNL researchers for NASA, is part of a cargo spacecraft bound for the International Space Station. The shield was printed at the Department of Energy’s Manufacturing Demonstration Facility at ORNL. Credit: ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-07/Sanded5.jpg?h=dce12e0c&itok=_8wzeG94)
A research team at Oak Ridge National Laboratory have 3D printed a thermal protection shield, or TPS, for a capsule that will launch with the Cygnus cargo spacecraft as part of the supply mission to the International Space Station.
![ORNL researchers combined additive manufacturing with conventional compression molding to produce high-performance thermoplastic composites, demonstrating the potential for the use of large-scale multimaterial preforms to create molded composites. Credit: ORNL/U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-02/compressionMold01.jpg?h=985dab9b&itok=4DgnSlRM)
Oak Ridge National Laboratory researchers combined additive manufacturing with conventional compression molding to produce high-performance thermoplastic composites reinforced with short carbon fibers.
![Transition metals stitched into graphene with an electron beam form promising quantum building blocks. Credit: Ondrej Dyck, Andrew Lupini and Jacob Swett/ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-02/quantum-building-blocks.jpg?h=6e276780&itok=uf-gKRle)
Oak Ridge National Laboratory scientists demonstrated that an electron microscope can be used to selectively remove carbon atoms from graphene’s atomically thin lattice and stitch transition-metal dopant atoms in their place.
![ORNL researchers used gas metal arc welding additive technology to print the die for a B-pillar or vertical roof support structure for a sport utility vehicle, demonstrating a 20% improvement in the cooling rate. Credit: ORNL/U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-02/Hot_stamping_die_0.jpg?h=71976bb4&itok=p2mbmEaN)
A team of Oak Ridge National Laboratory researchers demonstrated that an additively manufactured hot stamping die – a tool used to create car body components – cooled faster than those produced by conventional manufacturing methods.
![A 3D printed turbine blade demonstrates the use of the new class of nickel-based superalloys that can withstand extreme heat environments without cracking or losing strength. Credit: ORNL/U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-02/2019-P05612-2_0.jpg?h=cdf7d3ee&itok=XuA2HJ2w)
Oak Ridge National Laboratory researchers have demonstrated that a new class of superalloys made of cobalt and nickel remains crack-free and defect-resistant in extreme heat, making them conducive for use in metal-based 3D printing applications.
![Researchers at ORNL’s Center for Nanophase Materials Sciences and the University of Tennessee Health Science Center partnered to design a COVID-19 screening whistle for convenient home testing. Credit: Michelle Lehman/ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2021-01/covid_whistle_tag_no_logo_0.png?h=d1cb525d&itok=IMMECFgK)
Collaborators at Oak Ridge National Laboratory and the University of Tennessee Health Science Center are developing a breath-sampling whistle that could make COVID-19 screening easy to do at home.