Filter News
Area of Research
News Type
Media Contacts
![exp_in_10_dry_tube.jpg exp_in_10_dry_tube.jpg](/sites/default/files/styles/list_page_thumbnail/public/exp_in_10_dry_tube.jpg?itok=cmBuu2CQ)
Scientists from Oak Ridge National Laboratory performed a corrosion test in a neutron radiation field to support the continued development of molten salt reactors.
![X1800-REED-Maritime Risk Symposium 2018 logo-AM V5-01.jpg X1800-REED-Maritime Risk Symposium 2018 logo-AM V5-01.jpg](/sites/default/files/styles/list_page_thumbnail/public/X1800-REED-Maritime%20Risk%20Symposium%202018%20logo-AM%20V5-01.jpg?itok=_AN4HV63)
Thought leaders from across the maritime community came together at Oak Ridge National Laboratory to explore the emerging new energy landscape for the maritime transportation system during the Ninth Annual Maritime Risk Symposium.
![Autonomous_vehicle_simulation_ORNL.jpg Autonomous_vehicle_simulation_ORNL.jpg](/sites/default/files/styles/list_page_thumbnail/public/Autonomous_vehicle_simulation_ORNL.jpg?itok=2pnITULi)
Self-driving cars promise to keep traffic moving smoothly and reduce fuel usage, but proving those advantages has been a challenge with so few connected and automated vehicles, or CAVs, currently on the road.
![ORNL is again hosting a workshop focused on the next generation of molten salt reactors. ORNL is again hosting a workshop focused on the next generation of molten salt reactors.](/sites/default/files/styles/list_page_thumbnail/public/news/images/05%20-%20NUCLEAR_Molten_Salt_Reactor_Workshop.jpg?itok=5mV4FIMW)
Experts focused on the future of nuclear technology will gather at Oak Ridge National Laboratory for the fourth annual Molten Salt Reactor Workshop on October 3–4.
![Researchers 3D printed molds for precasting concrete using the Big Area Additive Manufacturing, or BAAM™, system at DOE’s Manufacturing Demonstration Facility at ORNL. Complex, durable mold designs can be produced in less time than traditional wood or fib Researchers 3D printed molds for precasting concrete using the Big Area Additive Manufacturing, or BAAM™, system at DOE’s Manufacturing Demonstration Facility at ORNL. Complex, durable mold designs can be produced in less time than traditional wood or fib](/sites/default/files/styles/list_page_thumbnail/public/news/images/02%20-%203D-printed_precast_concrete_molds.gif?itok=nni1l9l2)
The construction industry may soon benefit from 3D printed molds to make concrete facades, promising lower cost and production time. Researchers at Oak Ridge National Laboratory are evaluating the performance of 3D printed molds used to precast concrete facades in a 42-story buildin...
![California charging EV station map California charging EV station map](/sites/default/files/styles/list_page_thumbnail/public/news/images/Untitled-1%20%281%29.jpg?itok=NkA3kv-0)
Officials responsible for anticipating the demand for electric vehicle charging stations could get help through a sophisticated new method developed at Oak Ridge National Laboratory. The method considers electric vehicle volume and the random timing of vehicles arriving at cha...