Filter News
Area of Research
- (-) Materials (44)
- Advanced Manufacturing (2)
- Biological Systems (1)
- Clean Energy (50)
- Climate and Environmental Systems (2)
- Fossil Energy (1)
- Fusion and Fission (1)
- Isotopes (1)
- National Security (2)
- Neutron Science (16)
- Nuclear Science and Technology (7)
- Renewable Energy (2)
- Supercomputing (22)
- Transportation Systems (1)
Media Contacts
![Hood Whitson, chief executive officer of Element3, and Cynthia Jenks, associate laboratory director for the Physical Sciences Directorate, shake hands during the Element3 licensing event at ORNL on May 3, 2024. Credit: Carlos Jones/ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2024-05/2024-P07584.jpg?h=10d202d3&itok=YC2Uq_6B)
A collection of seven technologies for lithium recovery developed by scientists from ORNL has been licensed to Element3, a Texas-based company focused on extracting lithium from wastewater produced by oil and gas production.
![Caption: Jaswinder Sharma makes battery coin cells with a lightweight current collector made of thin layers of aligned carbon fibers in a polymer with carbon nanotubes. Credit: Genevieve Martin/ORNL, U.S. Dept. of Energy](/sites/default/files/styles/list_page_thumbnail/public/2024-01/sharma1_1.jpg?h=f7dae89e&itok=JiSsMewF)
Electric vehicles can drive longer distances if their lithium-ion batteries deliver more energy in a lighter package. A prime weight-loss candidate is the current collector, a component that often adds 10% to the weight of a battery cell without contributing energy.
![Tennessine thumbnail Tennessine thumbnail](/sites/default/files/styles/list_page_thumbnail/public/Tennessine-thumb%5B2%5D.jpg?itok=PEPnpv14)
![Rubber-lignin samples Rubber-lignin samples](/sites/default/files/styles/list_page_thumbnail/public/Rubber-lignin%20samples_0.jpg?itok=qpoXaClz)
![This isotropic, neodymium-iron-boron bonded permanent magnet was 3D-printed at DOE’s Manufacturing Demonstration Facility at Oak Ridge National Laboratory. This isotropic, neodymium-iron-boron bonded permanent magnet was 3D-printed at DOE’s Manufacturing Demonstration Facility at Oak Ridge National Laboratory.](/sites/default/files/styles/list_page_thumbnail/public/3Dprintedmagnet_image1_0.jpg?itok=uHDlDr_T)
Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated that permanent magnets produced by additive manufacturing can outperform bonded magnets made using traditional techniques while conserving critical materials. Scientists fabric...
![carbon nanospikes carbon nanospikes](/sites/default/files/styles/list_page_thumbnail/public/carbon_nanospikes.jpg?itok=D0GNAvH4)
![A simulation shows the path for the collision of a krypton ion (blue) with a defected graphene sheet and subsequent formation of a carbon vacancy (red). Red shades indicate local strain in the graphene. Image credit: Kichul Yoon, Penn State A simulation shows the path for the collision of a krypton ion (blue) with a defected graphene sheet and subsequent formation of a carbon vacancy (red). Red shades indicate local strain in the graphene. Image credit: Kichul Yoon, Penn State](/sites/default/files/styles/list_page_thumbnail/public/news/images/graphene_defect1.jpg?itok=2KdyjJb0)
![Superhydrophobic water droplets Superhydrophobic water droplets](/sites/default/files/styles/list_page_thumbnail/public/Superhydrophobic%20water%20droplets.jpg?itok=4iJXp2Ql)
![ORNL’s Michael Manley led a study to discover the key to the success of modern materials used in ultrasound machines and other piezoelectric devices. ORNL’s Michael Manley led a study to discover the key to the success of modern materials used in ultrasound machines and other piezoelectric devices.](/sites/default/files/styles/list_page_thumbnail/public/news/images/2016-P04731.jpg?itok=b-quvxzq)
The lighter wand for your gas BBQ, a submarine’s sonar device and the ultrasound machine at your doctor’s office all rely on piezoelectric materials, which turn mechanical stress into electrical energy, and vice versa. In 1997, researchers developed piezoelectric...
![To direct-write the logo of the Department of Energy’s Oak Ridge National Laboratory, scientists started with a gray-scale image. To direct-write the logo of the Department of Energy’s Oak Ridge National Laboratory, scientists started with a gray-scale image.](/sites/default/files/styles/list_page_thumbnail/public/news/images/ORNL%20Leaf%20Logo_No%20Scale_Green_v2.jpg?itok=rpIXT_ko)