121 - 130 of 695 Results
In the proposed design, a 3d design method is proposed to design 3d heat sinks which would allow non uniform flow along the flow direction while the predecessor design and majority of the conventional designs are extrusion based design with straight flow path.
The intensified, modular packing device can be used to enhance mass and heat transfer for exothermic or endothermic systems, with the objective to reduce the size required of process equipment, which can lead to significant cost reduction.
This invention enables utilization of multiple primary energy sources such as electricity, natural gas, hydrogen, propane, biogas in industrial and commercial heating equipment.
The use of Fluidized Bed Chemical Vapor Deposition to coat particles or fibers is inherently slow and capital intensive, as it requires constant modifications to the equipment to account for changes in the characteristics of the substrates to be coated.
Concrete floor slab flatness and levelness are parameters often specified in construction documents that contractors must meet to ensure a high quality of construction. However, the measurement of these parameters is cumbersome and time-consuming.
Multi-terminal DC (MTdc) systems based on high-voltage DC (HVDC) transmission technology is an upcoming concept. In such systems, either asymmetric monopole or bi-pole systems are generally employed. Such systems are not suitable for easy expansion.
Stability performance of interconnected power grids plays crucial roles on their secure operation to prevent cascading failure and blackout.
This invention proposes a Honeycomb-DD coupling structure that addresses the shortcomings of the conventional honeycomb coil array and gathering the advantage of DD and honeycomb designs advantages in a single design.
Free-standing, thin films were fabricated with a binder resulting in nearly an order of magnitude thickness decrease while increasing porosity and activation energy. These effects of such diminished significantly. Free-standing films could be fabricated with a binder.