Peter L Wang R&D Associate Staff Contact wangpl@ornl.gov | 865.241.9644 All Publications Strategies for a scalable multi-robot large scale wire arc additive manufacturing system Off-axis and nonplanar slicing... Toolpath considerations for DED: Arc and laser welding Closing the Loop Travels, optimizations, and ordering Toolpath considerations for hybrid additive manufacturing Mechanical systems and kinematics Toolpath considerations for 5-axis systems Advanced Manufacturing Workflows for Tokamak Internal Components The g-code file... Toolpath considerations for extrusion: Pellet, filament, concrete, and thermoset Planar slicing for nonextrusion AM processes... 5. Cross-Sectioning 9. Support, Raft, Brim, and Skirt Pathing 3. Motion Platforms and Kinematic Arrangements 4. Geometry Data Storage 8. Open-Loop Toolpath Generation... 6. Closed-Loop Toolpath Generation... 10. Path Modifiers 1. Introduction to Additive Manufacturing 7. Space-Filling Toolpath Generation... DYNAMIC BEAM SHAPE SENSING AND CONTROL IN AN OPEN ARCHITECTURE METAL AM SYSTEM FOR MICROSTRUCTURE MANIPULATION Automated tracking of prefabricated components for a real-time evaluator to optimize and automate installation Load balancing for multi-beam additive manufacturing systems Recycling polymer composite granulate/regrind using big area additive manufacturing... Pagination Current page 1 Page 2 Next page ›› Last page Last » Organizations Energy Science and Technology Directorate Manufacturing Science Division Precision Manufacturing and Machining Section Manufacturing Systems Design Group User Facilities Manufacturing Demonstration Facility
