Filter Results
Related Organization
- Biological and Environmental Systems Science Directorate (23)
- Computing and Computational Sciences Directorate (35)
- Energy Science and Technology Directorate
(217)
- Fusion and Fission Energy and Science Directorate (21)
- Information Technology Services Directorate (2)
- Isotope Science and Enrichment Directorate (6)
- National Security Sciences Directorate (17)
- Neutron Sciences Directorate (11)
- Physical Sciences Directorate
(128)
- User Facilities (27)
Researcher
- Andrzej Nycz
- Chris Masuo
- Luke Meyer
- William Carter
- Alex Walters
- Ben Lamm
- Beth L Armstrong
- Bruce A Pint
- Bruce Hannan
- Diana E Hun
- Easwaran Krishnan
- James Manley
- Jamieson Brechtl
- Joe Rendall
- Joshua Vaughan
- Karen Cortes Guzman
- Kashif Nawaz
- Kuma Sumathipala
- Loren L Funk
- Meghan Lamm
- Mengjia Tang
- Muneeshwaran Murugan
- Peter Wang
- Polad Shikhaliev
- Shajjad Chowdhury
- Steven J Zinkle
- Theodore Visscher
- Tim Graening Seibert
- Tolga Aytug
- Tomonori Saito
- Vladislav N Sedov
- Weicheng Zhong
- Wei Tang
- Xiang Chen
- Yacouba Diawara
- Yanli Wang
- Ying Yang
- Yutai Kato
- Zoriana Demchuk

ORNL has developed a large area thermal neutron detector based on 6LiF/ZnS(Ag) scintillator coupled with wavelength shifting fibers. The detector uses resistive charge divider-based position encoding.

Estimates based on the U.S. Department of Energy (DOE) test procedure for water heaters indicate that the equivalent of 350 billion kWh worth of hot water is discarded annually through drains, and a large portion of this energy is, in fact, recoverable.

The incorporation of low embodied carbon building materials in the enclosure is increasing the fuel load for fire, increasing the demand for fire/flame retardants.

New demands in electric vehicles have resulted in design changes for the power electronic components such as the capacitor to incur lower volume, higher operating temperatures, and dielectric properties (high dielectric permittivity and high electrical breakdown strengths).

The first wall and blanket of a fusion energy reactor must maintain structural integrity and performance over long operational periods under neutron irradiation and minimize long-lived radioactive waste.