Filter Results
Related Organization
- Biological and Environmental Systems Science Directorate (23)
- Computing and Computational Sciences Directorate (35)
- Energy Science and Technology Directorate
(217)
- Fusion and Fission Energy and Science Directorate (21)
- Information Technology Services Directorate (2)
- Isotope Science and Enrichment Directorate (6)
- National Security Sciences Directorate (17)
- Neutron Sciences Directorate (11)
- Physical Sciences Directorate
(128)
- User Facilities (27)
Researcher
- Kashif Nawaz
- Beth L Armstrong
- Joe Rendall
- Zhiming Gao
- Jun Qu
- Kai Li
- Praveen Cheekatamarla
- Vishaldeep Sharma
- Adam Willoughby
- Alex Plotkowski
- Amit Shyam
- Corson Cramer
- James A Haynes
- James Manley
- Jamieson Brechtl
- Kyle Gluesenkamp
- Meghan Lamm
- Mingkan Zhang
- Rishi Pillai
- Steve Bullock
- Sumit Bahl
- Tomas Grejtak
- Alice Perrin
- Ben Lamm
- Bo Shen
- Brandon Johnston
- Brian Fricke
- Bruce A Pint
- Bryan Lim
- Charles Hawkins
- Cheng-Min Yang
- Christopher Ledford
- David J Mitchell
- Easwaran Krishnan
- Ethan Self
- Gabriel Veith
- Gerry Knapp
- Hongbin Sun
- Huixin (anna) Jiang
- James Klett
- Jiheon Jun
- Jordan Wright
- Jovid Rakhmonov
- Khryslyn G Araño
- Marie Romedenne
- Marm Dixit
- Matthew S Chambers
- Melanie Moses-DeBusk Debusk
- Michael Kirka
- Muneeshwaran Murugan
- Nancy Dudney
- Nicholas Richter
- Nickolay Lavrik
- Peeyush Nandwana
- Pengtao Wang
- Priyanshi Agrawal
- Rangasayee Kannan
- Sergiy Kalnaus
- Shajjad Chowdhury
- Sunyong Kwon
- Tolga Aytug
- Trevor Aguirre
- Troy Seay
- Ying Yang
- Yiyu Wang
- Yong Chae Lim
- Zhili Feng

Currently available cast Al alloys are not suitable for various high-performance conductor applications, such as rotor, inverter, windings, busbar, heat exchangers/sinks, etc.

US coastal and island communities have vulnerable energy infrastructure and high energy costs, which are exacerbated by climate change.

The invented alloys are a new family of Al-Mg alloys. This new family of Al-based alloys demonstrate an excellent ductility (10 ± 2 % elongation) despite the high content of impurities commonly observed in recycled aluminum.

The invention presented here addresses key challenges associated with counterfeit refrigerants by ensuring safety, maintaining system performance, supporting environmental compliance, and mitigating health and legal risks.

This invention aims to develop a new feature for a heat pump water heater having a forced flow condenser, coupled with a mixing valve, and a new feature to maximize the first hour rating and provide quick response to hot water demand, comparable to a typical gas water heater.&

A novel method that prevents detachment of an optical fiber from a metal/alloy tube and allows strain measurement up to higher temperatures, about 800 C has been developed. Standard commercial adhesives typically only survive up to about 400 C.

Estimates based on the U.S. Department of Energy (DOE) test procedure for water heaters indicate that the equivalent of 350 billion kWh worth of hot water is discarded annually through drains, and a large portion of this energy is, in fact, recoverable.

A new nanostructured bainitic steel with accelerated kinetics for bainite formation at 200 C was designed using a coupled CALPHAD, machine learning, and data mining approach.

The heat exchanger is a three-medium heat exchanger with phase change material (PCM) stored in the external fin tubes. It allows the refrigerant flowing inside the internal fin tubes and the air to

Test facilities to evaluate materials compatibility in hydrogen are abundant for high pressure and low temperature (<100C).