Filter Results
Related Organization
- Biological and Environmental Systems Science Directorate (23)
- Computing and Computational Sciences Directorate (35)
- Energy Science and Technology Directorate (217)
- Fusion and Fission Energy and Science Directorate (21)
- Information Technology Services Directorate (2)
- Isotope Science and Enrichment Directorate (6)
- National Security Sciences Directorate (17)
- Neutron Sciences Directorate (11)
- Physical Sciences Directorate
(128)
- User Facilities (27)
Researcher
- Radu Custelcean
- Costas Tsouris
- Alex Plotkowski
- Amit Shyam
- Gyoung Gug Jang
- Jeffrey Einkauf
- Lawrence {Larry} M Anovitz
- Benjamin L Doughty
- Bruce Moyer
- Gs Jung
- James A Haynes
- Nikki Thiele
- Santa Jansone-Popova
- Sumit Bahl
- Alexander I Wiechert
- Alice Perrin
- Andres Marquez Rossy
- Andrew G Stack
- Gerry Knapp
- Ilja Popovs
- Jayanthi Kumar
- Jennifer M Pyles
- Jong K Keum
- Jovid Rakhmonov
- Juliane Weber
- Laetitia H Delmau
- Luke Sadergaski
- Md Faizul Islam
- Mina Yoon
- Nicholas Richter
- Parans Paranthaman
- Peeyush Nandwana
- Peng Yang
- Ryan Dehoff
- Sai Krishna Reddy Adapa
- Santanu Roy
- Saurabh Prakash Pethe
- Subhamay Pramanik
- Sunyong Kwon
- Uvinduni Premadasa
- Vera Bocharova
- Ying Yang
- Yingzhong Ma

The technologies provides for regeneration of anion-exchange resin.
Contact
To learn more about this technology, email partnerships@ornl.gov or call 865-574-1051.

Ruthenium is recovered from used nuclear fuel in an oxidizing environment by depositing the volatile RuO4 species onto a polymeric substrate.

CO2 capture by mineral looping, either using calcium or magnesium precursors requires that the materials be calcined after CO2 is captured from the atmosphere. This separates the CO2 for later sequestration and returned the starting material to its original state.

Currently available cast Al alloys are not suitable for various high-performance conductor applications, such as rotor, inverter, windings, busbar, heat exchangers/sinks, etc.

The invented alloys are a new family of Al-Mg alloys. This new family of Al-based alloys demonstrate an excellent ductility (10 ± 2 % elongation) despite the high content of impurities commonly observed in recycled aluminum.

This invention describes a new class of amphiphilic chelators (extractants) that can selectively separate large, light rare earth elements from heavy, small rare earth elements in solvent extraction schemes.

Among the methods for point source carbon capture, the absorption of CO2 using aqueous amines (namely MEA) from the post-combustion gas stream is currently considered the most promising.

The increasing demand for high-purity lanthanides, essential for advanced technologies such as electronics, renewable energy, and medical applications, presents a significant challenge due to their similar chemical properties.

Mineral looping is a promising method for direct air capture of CO2. However, reduction of sorbent reactivity after each loop is likely to be significant problems for mineral looping by MgO.

ORNL contributes to developing the concept of passive CO2 DAC by designing and testing a hybrid sorption system. This design aims to leverage the advantages of CO2 solubility and selectivity offered by materials with selective sorption of adsorbents.