51 - 60 of 164 Results
Carbon capture from air typically requires large amounts of solvent and sorbent that are energetically costly to regenerate. It also suffers from degradation, is environmentally unsustainable, and very expensive.
In additive manufacturing large stresses are induced in the build plate and part interface. A result of these stresses are deformations in the build plate and final component.
The incorporation of low embodied carbon building materials in the enclosure is increasing the fuel load for fire, increasing the demand for fire/flame retardants.
This technology identifies enzymatic routes to synthesize amide oligomers with defined sequence to improve polymerization of existing materials or enable polymerization of new materials. Polymers are generally composed of one (e.g. Nylon 6) or two (e.g.
A valve solution that prevents cross contamination while allowing for blocking multiple channels at once using only one actuator.
ORNL contributes to developing the concept of passive CO2 DAC by designing and testing a hybrid sorption system. This design aims to leverage the advantages of CO2 solubility and selectivity offered by materials with selective sorption of adsorbents.
Finite element (FE) numerical computation method is widely used to facilitate the design and optimization of manufacturing processes using two types of solvers, implicit and explicit.
Electrochemistry synthesis and characterization testing typically occurs manually at a research facility.
Materials produced via additive manufacturing, or 3D printing, can experience significant residual stress, distortion and cracking, negatively impacting the manufacturing process.
Carbon fiber is used in a wide range of manufacturing that utilize composite materials, from aerospace to golf clubs, as it has high strength and is lightweight. The process for manufacturing carbon fiber is complex and requires several stages.