Filter Results
Related Organization
- Biological and Environmental Systems Science Directorate (23)
- Computing and Computational Sciences Directorate (35)
- Energy Science and Technology Directorate
(217)
- Fusion and Fission Energy and Science Directorate (21)
- Information Technology Services Directorate (2)
- Isotope Science and Enrichment Directorate (6)
- National Security Sciences Directorate (17)
- Neutron Sciences Directorate (11)
- Physical Sciences Directorate
(128)
- User Facilities (27)
Researcher
- Amit Shyam
- Alex Plotkowski
- Bo Shen
- Lawrence {Larry} M Anovitz
- Praveen Cheekatamarla
- Vishaldeep Sharma
- James A Haynes
- James Manley
- Kyle Gluesenkamp
- Ryan Dehoff
- Sumit Bahl
- Adam Stevens
- Alice Perrin
- Andres Marquez Rossy
- Andrew G Stack
- Brian Post
- Christopher Fancher
- Dean T Pierce
- Easwaran Krishnan
- Gerry Knapp
- Gordon Robertson
- Hongbin Sun
- Jamieson Brechtl
- Jay Reynolds
- Jeff Brookins
- Joe Rendall
- Jovid Rakhmonov
- Juliane Weber
- Kashif Nawaz
- Melanie Moses-DeBusk Debusk
- Muneeshwaran Murugan
- Nicholas Richter
- Peeyush Nandwana
- Peng Yang
- Peter Wang
- Rangasayee Kannan
- Roger G Miller
- Sai Krishna Reddy Adapa
- Sarah Graham
- Sudarsanam Babu
- Sunyong Kwon
- William Peter
- Yifeng Hu
- Ying Yang
- Yukinori Yamamoto

CO2 capture by mineral looping, either using calcium or magnesium precursors requires that the materials be calcined after CO2 is captured from the atmosphere. This separates the CO2 for later sequestration and returned the starting material to its original state.

Currently available cast Al alloys are not suitable for various high-performance conductor applications, such as rotor, inverter, windings, busbar, heat exchangers/sinks, etc.

The invented alloys are a new family of Al-Mg alloys. This new family of Al-based alloys demonstrate an excellent ductility (10 ± 2 % elongation) despite the high content of impurities commonly observed in recycled aluminum.

The invention presented here addresses key challenges associated with counterfeit refrigerants by ensuring safety, maintaining system performance, supporting environmental compliance, and mitigating health and legal risks.

This invention aims to develop a new feature for a heat pump water heater having a forced flow condenser, coupled with a mixing valve, and a new feature to maximize the first hour rating and provide quick response to hot water demand, comparable to a typical gas water heater.&

Develop an innovative refrigerator having a thermoelectric cooler cascaded with a regular refrigerator compression system. the TE cooler dedicatedly controls the temperature in a freezer compartment.

The lack of real-time insights into how materials evolve during laser powder bed fusion has limited the adoption by inhibiting part qualification. The developed approach provides key data needed to fabricate born qualified parts.

Estimates based on the U.S. Department of Energy (DOE) test procedure for water heaters indicate that the equivalent of 350 billion kWh worth of hot water is discarded annually through drains, and a large portion of this energy is, in fact, recoverable.

Mineral looping is a promising method for direct air capture of CO2. However, reduction of sorbent reactivity after each loop is likely to be significant problems for mineral looping by MgO.