1 - 10 of 13 Results
A novel method that prevents detachment of an optical fiber from a metal/alloy tube and allows strain measurement up to higher temperatures, about 800 C has been developed. Standard commercial adhesives typically only survive up to about 400 C.
The use of biomass fiber reinforcement for polymer composite applications, like those in buildings or automotive, has expanded rapidly due to the low cost, high stiffness, and inherent renewability of these materials. Biomass are commonly disposed of as waste.
Test facilities to evaluate materials compatibility in hydrogen are abundant for high pressure and low temperature (<100C).
High strength, oxidation resistant refractory alloys are difficult to fabricate for commercial use in extreme environments.
We have developed an aerosol sampling technique to enable collection of trace materials such as actinides in the atmosphere.
The technologies provide a coating method to produce corrosion resistant and electrically conductive coating layer on metallic bipolar plates for hydrogen fuel cell and hydrogen electrolyzer applications.
In manufacturing parts for industry using traditional molds and dies, about 70 percent to 80 percent of the time it takes to create a part is a result of a relatively slow cooling process.
The technology provides a transformational approach to digitally manufacture structural alloys with co- optimized strength and environmental resistance
This technology combines 3D printing and compression molding to produce high-strength, low-porosity composite articles.