81 - 90 of 116 Results
The ID provides a solution approach for faster chemical processing and carbon functional grading from SiC to MC to provide a tougher carbon and CMC structure.
The solution proposed here is a modified carbon-based tile face that is mechanically combined with an insulative backing. The tile face is based on a material architecture to minimize weight and thermal conductivity while maximizing thermal stability.
Anisotropic bonded critical rare earth free permanent magnets in a polymer matrix fabricated using an additive manufacturing process.
Free-standing, thin films were fabricated with a binder resulting in nearly an order of magnitude thickness decrease while increasing porosity and activation energy. These effects of such diminished significantly. Free-standing films could be fabricated with a binder.
Compliance in a part, work holding, or base plate is beneficial for certain processes, but detrimental for machining and material removal.
This technology creates a light and metalless current collector for battery application. Cathodes coated on this new current collector demonstrated similar contact resistance, lower charge transfer resistance and similar or high rate performance.
In additive manufacturing large stresses are induced in the build plate and part interface. A result of theses stresses are deformations in the build plate and final component.