Available Technologies

An electrochemical cell has been specifically designed to maximize CO2 release from the seawater while also not changing the pH of the seawater before returning to the sea.

Estimates based on the U.S. Department of Energy (DOE) test procedure for water heaters indicate that the equivalent of 350 billion kWh worth of hot water is discarded annually through drains, and a large portion of this energy is, in fact, recoverable.

Technologies are described that are directed to polyphase rotary transformer for field excitation of electric machines.

Technologies directed to an LCC based induction cooktop architecture for non-ferromagnetic pan are described.

Contact

To learn more about this technology, email partnerships@ornl.gov or call 865-574-1051.

The hybrid powder-encapsulated solvent over comes carbon capture challenges by providing a solution for easy handling of a non-toxic solid that is non-volatile and stable upon alternative energy regeneration methods.

The heat exchanger is a three-medium heat exchanger with phase change material (PCM) stored in the external fin tubes. It allows the refrigerant flowing inside the internal fin tubes and the air to

Wireless charging of electric vehicles require the ability to control the output current in the power transfer system, but that is often not possible as the availability of signals from the secondary side to the primary side is difficult and not always feasible.

This technology allows for the utilization of butanediol isomers to form a range of C4 oxygenated compounds as renewably sourced feedstocks for fuels and chemicals production in a range of industrial applications.

Lean-burn natural gas (NG) engines are a preferred choice for the hard-to-electrify sectors for higher efficiency and lower NOx emissions, but methane slip can be a challenge.

The incorporation of low embodied carbon building materials in the enclosure is increasing the fuel load for fire, increasing the demand for fire/flame retardants.