TS Byun Distinguished R&D Staff and Group Leader, Radiation Effects and Microstructural Analysis Contact BYUNTS@ORNL.GOV All Publications Tensile fracture characteristics of nanostructured ferritic alloy 14YWT Evaluation of Fracture Stress for the SiC Layer of TRISO-Coated Fuel Particles by A Modified Crush Testing OPTIMIZATION OF FRACTURE STRENGTH TESTS FOR THE SIC LAYER OF COATED FUEL PARTICLES BY FINITE ELEMENT ANALYSIS... Analysis of Tensile Deformation and Failure in Austenitic Stainless Steels: Part II- Irradiation Dose Dependence Analysis of Tensile Deformation and Failure in Austenitic Stainless Steels: Part I- Temperature Dependence... Fabrication and Characterization of Sixteen SiC Variants Deposited on the Same IPyC Substrate for Fracture Strength Testing Low-temperature mechanical properties of superconducting radio frequency cavity materials... The Change in the hardness of LCAC. TZM, and ODS molybdenum in the post-irradiated and annealed conditions... Local mechanical properties of Alloy 82/182 dissimilar weld joint between SA508 Gr.1a and F316 SS at RT and 320C Weldable ductile molybdenum alloy development... Fracture Stress Data for SiC Layers in the TRISO-Coated Fuel Particles Low-Temperature Thermally-Activated Deformation and Irradiation Softening in Neutron-irradiated Molybdenum Dose dependence of mechanical properties in tantalum and tantalum alloys after low temperature irradiation... Deformation and Fracture Properties in Neutron Irradiated Pure Mo and Mo Alloys... Low temperature neutron irradiation effects on microstructure and tensile properties of molybdenum Deformation in metals after low temperature irradiation: Part II - Irradiation hardening, strain hardening, and stress ratios... Deformation in metals after low temperature irradiation: Part I - Mapping macroscopic deformation modes on true stress-dose p... Irradiation hardening in unalloyed and ODS molybdenum during low dose neutron irradiation at 300 and 600?C Strain hardening during mechanical twining and dislocation channeling in irradiated 316 stainless steels Deformation-induced Martensite Formation and Dislocation Channeling in Neutron-Irradiated 316 Stainless Steel Miniaturized fracture tests for thin-walled tubular SiC specimens Defect Cluster Formation and Radiation Hardening in molybdenum Neutron-Irradiated at 80C Handbook of SiC Properties for Fuel Performance Modeling The Temperature Dependence of the Yield Stress for Neutron-Irradiated Molybdenum... Temperature effect on the low-cycle fatigue behavior of type 316L stainless steel: cyclic non-stabilization and an invariable... Pagination First page « First Previous page ‹‹ … Page 3 Current page 4 Page 5 Next page ›› Last page Last » Key Links Google Scholar ORCID Organizations Physical Sciences Directorate Materials Science and Technology Division Materials in Extremes Section Radiation Effects and Microstructural Analysis Group
