M. Dylan Richardson Contact 423.506.5300 | richardsonmd@ornl.gov All Publications The effect of powder feedstock and heat treatment on the thermal and mechanical properties of binder jet printed ZrC Environmental stability of additively manufactured siliconized silicon carbide for applications in hybrid energy systems... Accelerated fission rate irradiation design, pre-irradiation characterization, and adaptation of conventional PIE methods for U-10Mo and U-17Mo Microstructure of irradiated AGR TRISO particle buffer layers as measured by X-ray computed tomography... Large-Scale Additive Manufacturing of Silicon Carbide with Process Monitoring Ordered Particle Packing in Dense TRISO/SiC Fuel Elements and Preliminary Assessment of Neutronic and Thermomechanical Characteristics Lessons Learned with Additive Manufacturing – Transformational Challenge Reactor Flow Test Articles Performance of Embedded Sensors in 3D Printed SiC Mechanical and Thermophysical Properties of 3D-Printed SiC before and after Neutron Irradiation – FY 2021... Initial Embedding of Functional Sensors in Additively Manufactured Silicon Carbide Particle Packing Characteristics in Dense TRISO/SiC Fuel Elements and the Impact of Neutronics and Thermomechanics Method for Measurement of TRISO Kernel and Layer Volumes by X-ray Computed Tomography Fabrication and Characterization Methodology of Transformational Challenge Reactor Fuel Form Mechanical and Thermophysical Properties of 3D-Printed SiC-FY20... Monolithic ATF MiniFuel Sample Capsules Ready for HFIR Insertion Organizations Fusion and Fission Energy and Science Directorate Nuclear Energy and Fuel Cycle Division Nuclear Fuel Development Section Fuel Cladding and Core Internals Group
