111 - 120 of 1800 Results
The substrate exchange turret with laser heating is a device that allows for up to 10 substrates to be mounted into a physical vapor deposition chamber at one time and be heated from the backside with a laser for temperature control during film growth.
Gas metal arc welding (GMAW) wire arc additive manufacturing (WAAM) processes use inert shielding to protect the weld arc during material deposition, but do not protect the trailing bead, which can lead to weld issues varying from low finish quality to diminished material prop
Most plastic is discarded after a single use, with about 76 percent of plastic waste discarded into landfills annually. The current practice is wasting feedstock resources, energy, and carbon used for their production.
The selective sequestration of radioactive technetium in aqueous environments remains a significant challenge. Amidst various available strategies, the demand for a simple yet effective solution to capture pertechnetate ions in complex aqueous matrices persists.
Adhesives for metal parts typically are liquid-based which require complex processing. This technology is a hot melt adhesive that is mixed and applied in a solid form and after the heating and cooling cycle creates strong bonds with the substrates in a matter of seconds.
Modern automobiles are operated by small computers that communicate critical information via a broadcast-based network architecture called controller area network (CAN).
