Yarom Polsky Division Director, Manufacturing Science Division Contact polskyy@ornl.gov | 865.576.0593 All Publications Stability study of aqueous foams under high-temperature and high-pressure conditions relevant to Enhanced Geothermal Systems ... EmSense: A High-Resolution Emulated Sensor for Experiments with the Smart Grid and Distributed Ledger Technology Medium-Voltage Testbed for Comparing Advanced Power Line Sensors vs. Measurement Transformers with Electrical Grid Events... Technologist in Residence for Advanced Manufacturing and Materials in Unconventional Oil and Gas Equipment and Infrastructure... Assessment and Commissioning of Electrical Substation Grid Testbed with a Real-Time Simulator and Protective Relays/Power Meters in the Loop Clean Energy Technology Applications on US Mine Land: Technical Analysis... Medium-Voltage Testbed for Comparing Advanced Power Line Sensors vs. Measurement Transformers with Electrical Grid Events Assessment and Commissioning of Electrical Substation Grid Testbed with a Real-Time Simulator and Protective Relays/Power Meters in the Loop Assessing Compatibility of Natural Gas Pipeline Materials with Hydrogen, CO2, and Ammonia U.S. DOE Clean Energy Demonstration Program on Current and Former Mine Land – A Review of Geothermal Energy Case Studies and Opportunities Outdoor Test Bed Performance of a Power Line Sensor Using a Real-Time Event Simulator Black-box optimization of a closed-circuit reverse osmosis system for desalination through extremum seeking control... Oak Ridge National Laboratory Pilot Demonstration of an Attestation and Anomaly Detection Framework using Distributed Ledger ... Roll-to-Roll Advanced Materials Manufacturing DOE Laboratory Collaboration - Early Stage R&D Phase 2 and FY 2021 Final Report Assessment of the Electrical Substation-Grid Testbed with Inside/ Outside Devices and Distributed Ledger Technology... Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems... High Temperature, High Pressure Stability of Aqueous Foams for Potential Application in Enhanced Geothermal System (EGS)... A techno-economic framework for comparing conventionally and additively manufactured parts for geothermal applications... Additive Manufacturing Case Study... Study of Additive Manufacturing Applications to Geothermal Technologies Final Project Report... Study on Foam Fracturing of Granite for the Development of Enhanced Geothermal Systems... High Temperature Stability of Aqueous Foams for Potential Application in Enhanced Geothermal System (EGS)... A high-pressure flow through test vessel for neutron imaging and neutron diffraction-based strain measurement of geological m... Study of Additive Manufacturing Application to Geothermal Technologies... High-Temperature Stability of Aqueous Foams as Potential Waterless Hydrofracking Fluid for Geothermal Reservoir Stimulation... Pagination Current page 1 Page 2 Next page ›› Last page Last » Key Links Curriculum Vitae ORCID Organizations Energy Science and Technology Directorate Electrification and Energy Infrastructures Division Energy Systems Integration & Controls Section
