Harry M Meyer III Development Staff Chemist Contact 865.574.5092 | meyerhmiii@ornl.gov All Publications Mechanically Reinforced Pseudosolid Polyelectrolyte Membranes via Layer-by-Layer Assembly for High-Performing Lithium-Metal B... Active Palladium Structures on Ceria Obtained by Tuning Pd–Pd Distance for Efficient Methane Combustion Iodine capture studies of silver mordenite and novel alternative metal sorbents Mitigating municipal solid waste fouling in biofuel conversion via screw surface modifications... Deuterium plasma induced preferential erosion in ultra-high temperature ceramics TiB2 and ZrB2 Impurity transport in PISCES-RF* Aerogel-derived nickel-iron oxide catalysts for oxygen evolution reaction in alkaline media Low-temperature dechlorination of polyvinyl chloride (PVC) for production of H2 and carbon materials using liquid metal catalysts Observation of tantalum deposition and growth on TiB2 and ZrB2 from PISCES-RF deuterium and helium plasma exposures... Characterization of fluidized bed chemical vapor deposition ZrC coatings on PyC/YSZ kernels deposited under differing conditions Effects of mercerization and fiber sizing of coir fiber for utilization in polypropylene composites Copper–Carbon Nanotube Composites Enabled by Brush Coating for Advanced Conductors Exploring Lead Zirconate Titanate, the Potential Advancement as an Anode for Li-Ion Batteries Detailed Characterization of Vitrinite-Rich Subbituminous and Bituminous Coals for Utilization in Carbon Fiber Precursor Prod... Elucidating the Role of Carbon Conductive Additive in the Processing and Electrochemical Behavior of Surface-Modified Si Anodes Minimizing Toxicity and Optimizing Lubricity of Ionic Liquids for Eco-Friendly Lubrication... Ionomer-free nanoporous iridium nanosheet electrodes with boosted performance and catalyst utilization for high-efficiency water electrolyzers Impact of titanium content on the thermo-mechanical and oxidation response of TiAlTa Low-Temperature Molten Salt Electrochemical CO2 Upcycling for Advanced Energy Materials Tough and recyclable carbon-fiber composites with exceptional interfacial adhesion via a tailored vitrimer-fiber interface Impact of titanium content on the thermo-mechanical and oxidation response of TiAlTa Carbon Coating Influence on the Formation of Percolating Electrode Networks for Silicon Anodes Armor for Steel: Facile Synthesis of Hexagonal Boron Nitride Films on Various Substrates Molten salt electrochemical upcycling of CO2 to graphite for high performance battery anodes Insights into the Chemistry of the Cathodic Electrolyte Interphase for PTFE-Based Dry-Processed Cathodes Pagination Current page 1 Page 2 Page 3 … Next page ›› Last page Last » Key Links ORCID Organizations Physical Sciences Directorate Chemical Sciences Division Chemical Transformations Section Surface Chemistry and Catalysis Group
