Ercan Cakmak Research Associate Contact CAKMAKE@ORNL.GOV All Publications Opening twisted polymer chains for simultaneously high printability and battery fast-charge Micromechanical aspects of deformation and failure of advanced Iron-Chromium-Aluminum alloys Characterization of Porosity and Pore Accessibility of Vitrinite-Rich Bituminous and Subbituminous Coals by Small-Angle Neutr... Additive Manufacturing of C/C-SiC Ceramic Matrix Composites by Automated Fiber Placement of Continuous Fiber Tow in Polymer with Pyrolysis and Reactive Silicon Melt Infiltration Leveraging computational thermodynamics to guide SiC-ZrC chemical vapor deposition process development Multiscale characterization and comparison of historical and modern nuclear graphite grades On the efficacy of post-build thermomechanical treatments to improve properties of Zirconium fabricated using ultrasonic additive manufacturing Ultra-high gamma irradiation of calcium silicate hydrates: Impact on mechanical properties, nanostructure, and atomic environments Interaction of beryllium with 316H stainless steel in molten Li2BeF4 (FLiBe) Characterization of anisotropic mechanical properties of polymer composites from a hybrid additive manufacturing-compression ... Qualitative and quantitative analysis of neutron irradiation effects in SiC/SiC composites using X-ray computed tomography A tracer study on sCO2 corrosion with multiple oxygen-bearing impurities Post weld heat treatment and operating temperature effect on tribological behavior of laser cladded stellite 21 coating Testing and Modeling of Functionally Graded Aluminum-Doped Zinc Oxide Using Spark Plasma Sintering and Discrete Powder Layers of Varying Composition Amphipathic Binder Integrating Ultrathin and Highly Ion-Conductive Sulfide Membrane for Cell-Level High-Energy-Density All-Solid-State Batteries In-situ X-ray Computed Tomography Analysis of Fracture Mechanisms in Ultrasonic Additively Manufactured Al-6061 Alloy... Compatibility of FeCrAlMo in Flowing Pb-Li at 600°C to 700°C Processing and microstructure of ZrB2–SiC composite prepared by reactive spark plasma sintering Wear Mechanism Analysis of a New Rotary Shear Biomass Comminution System... Development of a Reconstruction Methodology Based on X-Ray Computed Tomography to Generate Realistic 3D Concrete Microstructures in MOSAIC Alumina-based filters made via binder jet 3D printing of alumina powder, colloidal silica infiltration, and sintering Non-destructive characterization of additively manufactured components with x-ray computed tomography for part qualification: A study with laboratory and synchrotron x-rays Investigating the effect of different shielding gas mixtures on microstructure and mechanical properties of 410 stainless steel fabricated via large scale additive manufacturing Hydrogen diffusivity measurements of YH1.87 moderator materials with incoherent quasi elastic neutron scattering... Surface-modified and oven-dried microfibrillated cellulose reinforced biocomposites: Cellulose network enabled high performance Pagination First page « First Previous page ‹‹ Page 1 Current page 2 Page 3 … Next page ›› Last page Last » Key Links ORCID Organizations Physical Sciences Directorate Materials Science and Technology Division Foundational Materials Science Section Neutron and X-Ray Scattering Group
