Amy M Elliott

Group Leader - Robotics and Intelligent Systems

Contact

865.241.1358 | ELLIOTTAM@ORNL.GOV

All Publications

Packing density optimization and recyclability of multi-modal SiC powder feedstocks in binder jet additive manufacturing...

CRADA REPORT NFE2209377- BINDER JET ADDITIVE MANUFACTURING OF SILICON CARBIDE SOLAR REACTOR...

Process development of NiTi using binder jetting additive manufacturing: Investigation of the sintering process

Material selection and manufacturing for high-temperature heat exchangers: Review of state-of-the-art development, opportunities, and challenges

Sintering-based Metal Additive Manufacturing Methods for Magnetic Materials

Advanced manufacturing of 3D custom boron-carbide collimators designed for complex environments for neutron scattering

Design of robot grippers for binder jet products handling

Predictive binder jet additive manufacturing enabled by clean burn-off binder design...

Surface Finishing and Coating Parameters Impact on Additively Manufactured Binder-Jetted Steel–Bronze Composites

Machine Learning-Enabled Quantitative Analysis of Optically Obscure Scratches on Nickel-Plated Additively Manufactured (AM) Samples

3-D Printed Electro-Magnetic Objects for THz Communications

ADVANCES IN BINDER JET ADDITIVE MANUFACTURING

Oak Ridge National Laboratory
Project Fringe, Testing and Validation on Metal Additive Manufacturing

Spray coating for washout tooling by binder jet additive manufacturing

Large Area Projection Sintering Technology Development (CRADA Final Report)...

3D-printed B 4 C collimation for neutron pressure cells...

Additive manufacturing of strong silica sand structures enabled by polyethyleneimine binder

Alumina-based filters made via binder jet 3D printing of alumina powder, colloidal silica infiltration, and sintering

Inkjet-Based 3D Printing: From Quantum Dots to Steel Tools

Science Personality and STEM Ambassador

Binder Jet-Metals

Properties of SiC-Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration

W-ZrC composites prepared by reactive melt infiltration of Zr2Cu alloy into binder jet 3D printed WC preforms

An in-situ crosslinking binder for binder jet additive manufacturing

Computational Optimization of A 3D Printed Collimator