Mackenzie Ridley R&D Associate - High Temperature Coatings Contact RIDLEYMJ@ORNL.GOV All Publications Step-loaded creep testing of Zircaloy-4 cladding at higher temperatures in the α-phase Interface stability of ultrasonic additively manufactured Zircaloy-4 during hydrothermal corrosion High Temperature Mechanical Behavior of Refractory Alloys with Digital Image Correlation Recent High Burnup LOCA Testing at Oak Ridge National Laboratory... Dispersal of high-burnup fuel fragment surrogate particles during and after loss-of-coolant accident tests Understanding EBC Lifetimes and Performance for Industrial Gas Turbines In Situ Cladding Surface Temperature Measurements during Simulated LOCA Transients M3FT-24OR020204043: REPORT ON DIC CYCLIC DRYOUT TESTING OF ATF CLADDING MATERIALS... Effect of Cr content on the hydrothermal corrosion behavior of FeCrAl alloys Environmental barrier coatings on SiC without a silicon bond coating: oxidation resistance, failure modes, and future improvements Finite Element Modeling of the Phase Change in Thermally-Grown SiO2 in SiC Systems for Gas Turbines In-situ determination of strain during transient burst testing and the temperature dependence of Zircaloy-4 claddings Holistic comparison of environmental barrier coating material candidates through design of a figure of merit Residual Stress Measurements of Cr-coated Cladding FWP FEAA149: “Next Generation Environmental Barrier Coatings” ULTIMATE FY23 Vacuum Creep Testing Facility Operation Report In Situ Strain Analysis of Cr-coated Zircaloy-4 Under Simulated LOCA Conditions Oxidation performance and limitations of additively manufactured SiC/Si─O─C composites at elevated temperatures Effects of Cr/Zircaloy-4 coating qualities for enhanced accident tolerant fuel cladding Environmental barrier coatings on enhanced roughness SiC: Effect of plasma spraying conditions on properties and performance High temperature creep model development using in-situ 3-D DIC techniques during a simulated LOCA transient Raman spectroscopic characterization of SiO2 phase transformation and Si substrate stress relevant to EBC performance BISON validation to in situ cladding burst test and high-burnup LOCA experiments Steam oxidation and microstructural evolution of rare earth silicate environmental barrier coatings... Quantifying deformation during Zry-4 burst testing: a comparison of BISON and a combined in-situ digital image correlation and infrared thermography method Pagination Current page 1 Page 2 Next page ›› Last page Last » Key Links Google Scholar ORCID Organizations Physical Sciences Directorate Materials Science and Technology Division Materials in Extremes Section Corrosion Science and Technology Group
