Jamieson Brechtl Associate R&D Staff Member Contact 865.341.0338 | BRECHTLJM@ORNL.GOV All Publications Charge Reduction and Performance Analysis of a Heat Pump Water Heater Using R290 as a Refrigerant—A Field Study CRADA NFE-23-09918 FINAL REPORT –JOINING STUDY FOR FORMED PLATE HEAT EXCHANGERS... Heat transfer and visual observation of pool boiling of next-generation low-pressure refrigerant: R1336mzz(Z)... Corrosion Resistance of an AlCeMg/Stainless-Steel Reactive Bond A prediction model of failure threshold for shear deformation in a Zr-based bulk metallic glass Demonstration of the carbon capture with building make-up air unit Corrosion Behavior of a Reactive Bond Between Stainless Steel and a Cast AlCeMg Alloy Al-Ce Alloy-Based Compact Heat Exchanger for Refrigerant Charge Reduction and Unprecedented Durability Thermal shock resistance of additively manufactured alumina Microchannel Geometries for Improved Heat Transfer with Low-GWP refrigerants Influence of high-strain-rate compression and subsequent heat treatment on (TiNbZr)89(AlTa)11 refractory high-entropy alloys: Dynamic-mechanical behavior and microstructural changes Cost Reduction of Heat Pump Water Heating in Cold Climates for Low to Moderate Income Families Performance Evaluation of Drain Water Heat Recovery Exchangers for Heat Pump Water Heaters On the Corrosion Response of Novel Heat Exchangers Manufactured by Casting of Al-Ce-Mg Alloy Phase change electrolytes for combined electrochemical and thermal energy storage Direct air capture with amino acid solvent: Operational optimization using a crossflow air-liquid contactor A multifunctional rooftop unit for direct air capture Compatibility of LaFe13−x−yMnxSiyH1.6 and Eutectic Liquid GaInSn Alloy Shear band velocity and activation volume during shear deformation by acoustic emission in a Zr-based bulk metallic glass Heat Pump Water Heating for Multifamily Buildings in Cold Climates to Reduce the Energy Burden for Residents with Low to Mode... Porosity modeling in a TiNbTaZrMo high-entropy alloy for biomedical applications Development and characterization of a low-density TiNbZrAlTa refractory high entropy alloy with enhanced compressive strength and plasticity Scaling and Complexity of Stress Fluctuations Associated with Smooth and Jerky Flow in FeCoNiTiAl High-Entropy Alloy A comprehensive review on regeneration strategies for direct air capture... Serrated flow in NaI:Tl scintillator crystals... Pagination Current page 1 Page 2 Page 3 Next page ›› Last page Last » Key Links Curriculum Vitae ORCID Organizations Energy Science and Technology Directorate Buildings and Transportation Science Division Building Technologies Research Section Multifunctional Equipment Integration Group