Chad Parish Senior Research and Development Staff Member Contact PARISHCM@ORNL.GOV All Publications Milestone Report on Microstructure of Irradiated Sensors and Coupling Adhesive Bonds Advanced microscopy for characterization of high burnup commercial uo2 fuel before and after LOCA testing Initial microstructure examination of high burnup fuel with varying operational histories Report on the Second MPEX User Research Forum Origins of radiation-induced optical attenuation in neutron-irradiated single-crystal sapphire at elevated temperatures High Plasticity in Refractory Composite Fabrication by Ultrasonic Additive Manufacturing FUSION MATERIALS SEMIANNUAL PROGRESS REPORT FOR THE PERIOD ENDING JUNE 30, 2024 Deuterium plasma induced preferential erosion in ultra-high temperature ceramics TiB2 and ZrB2 Final Report on Characterization of Irradiated Sensors and Coupling Adhesive Bonds Observation of tantalum deposition and growth on TiB2 and ZrB2 from PISCES-RF deuterium and helium plasma exposures... FUSION MATERIALS SEMIANNUAL PROGRESS REPORT FOR THE PERIOD ENDING DECEMBER 31, 2023 Irradiation creep measurement and microstructural analysis of chromium nitride–coated zirconium alloy using pressurized tub... Irradiation of ultrasonic sensors and adhesive couplants for application in light water reactor primary loop piping and compo... FUSION MATERIALS SEMIANNUAL PROGRESS REPORT FOR THE PERIOD ENDING JUNE 30, 2023 Characterization of the radial microstructural evolution in LWR UO2 using electron backscatter diffraction Advanced Multiscale Microscopy Characterization of High Burnup LWR UO2 Before and After LOCA Testing Degradation of electrical resistivity of tungsten following shielded neutron irradiation FUSION MATERIALS RESEARCH AT OAK RIDGE NATIONAL LABORATORY IN FISCAL YEAR 2022 Qualification of Commercially Available Silicon Carbide for Passive Thermometry in Reactor Experiments – FY23 Status Report FUSION MATERIALS SEMIANNUAL PROGRESS REPORT FOR THE PERIOD ENDING DECEMBER 31, 2022 Non-destructive characterization of advanced nuclear fuel materials using neutron imaging Radiation induced amorphization of carbides in additively manufactured and conventional ferritic-martensitic steels: In-situ experiments on extraction replicas Identifying chemically similar multiphase nanoprecipitates in compositionally complex non-equilibrium oxides via machine learning Corrosion of 316H stainless steel in flowing FLiNaK salt Cluster Analysis of Combined EDS and EBSD Data to Solve Ambiguous Phase Identifications Pagination Current page 1 Page 2 Page 3 … Next page ›› Last page Last » Key Links ORCID Organizations Physical Sciences Directorate Materials Science and Technology Division Materials in Extremes Section Nuclear Energy Materials Microanalysis
