Amy Elliott Group Leader - Robotics and Intelligent Systems Contact ELLIOTTAM@ORNL.GOV All Publications CRADA REPORT NFE2209377- BINDER JET ADDITIVE MANUFACTURING OF SILICON CARBIDE SOLAR REACTOR Process development of NiTi using binder jetting additive manufacturing: Investigation of the sintering process Material selection and manufacturing for high-temperature heat exchangers: Review of state-of-the-art development, opportunities, and challenges Sintering-based Metal Additive Manufacturing Methods for Magnetic Materials Advanced manufacturing of 3D custom boron-carbide collimators designed for complex environments for neutron scattering Design of robot grippers for binder jet products handling Predictive binder jet additive manufacturing enabled by clean burn-off binder design... Surface Finishing and Coating Parameters Impact on Additively Manufactured Binder-Jetted Steel–Bronze Composites Machine Learning-Enabled Quantitative Analysis of Optically Obscure Scratches on Nickel-Plated Additively Manufactured (AM) Samples ADVANCES IN BINDER JET ADDITIVE MANUFACTURING Oak Ridge National Laboratory Project Fringe, Testing and Validation on Metal Additive Manufacturing 3-D Printed Electro-Magnetic Objects for THz Communications Spray coating for washout tooling by binder jet additive manufacturing Large Area Projection Sintering Technology Development (CRADA Final Report)... 3D-printed B 4 C collimation for neutron pressure cells... Additive manufacturing of strong silica sand structures enabled by polyethyleneimine binder Alumina-based filters made via binder jet 3D printing of alumina powder, colloidal silica infiltration, and sintering Science Personality and STEM Ambassador Binder Jet-Metals Inkjet-Based 3D Printing: From Quantum Dots to Steel Tools Properties of SiC-Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration W-ZrC composites prepared by reactive melt infiltration of Zr2Cu alloy into binder jet 3D printed WC preforms An in-situ crosslinking binder for binder jet additive manufacturing Computational Optimization of A 3D Printed Collimator Processing and Properties of SiC Composites made via Binder Jet 3D Printing and Infiltration and Pyrolysis of Preceramic Polymer Pagination Current page 1 Page 2 Page 3 Next page ›› Last page Last » Key Links Curriculum Vitae ORCID https://www.linkedin.com/in/amy-elliott-03073880/ Organizations User Facilities Manufacturing Demonstration Facility Energy Science and Technology Directorate Manufacturing Science Division Secure and Digital Manufacturing Section System Automation and Monitoring Research Precision Manufacturing and Manufacturing Innovation
