Exploring Material Solutions for Supercritical CO2 Applications above 800 °C... Journal December, 2022
Corrosion Compatibility of Stainless Steels and Nickel in Pyrolysis Biomass-Derived Oil at Elevated Storage Temperatures... Journal December, 2022
Quantifying deformation during Zry-4 burst testing: a comparison of BISON and a combined in-situ digital image correlation and infrared thermography method Journal December, 2022
Cyclic oxidation behavior of selected commercial NiCr-alloys for engine exhaust valves in wet air environment between 800 and 950 °C Journal November, 2022
The Effect of APS-HVOF Bond Coating Thickness Ratio on TBC Furnace Cycle Lifetime Journal October, 2022
Mechanical Joint Performances of Friction Self-piercing Riveted Carbon Fiber Reinforced Polymer and AZ31B Mg Alloy Journal October, 2022
Compatibility of Fe-Cr-Al and Fe-Cr-Al-Mo oxide dispersion strengthened steels with static liquid sodium at 700 ° C Journal October, 2022
Impact of annealing at 1000°C in flowing He with low O2 concentration on the room temperature tensile properties of Mo alloys ORNL Report September, 2022
New High-Strength Ni-based Alloys for High Temperature Service in Liquid Fluoride Salt Environments ORNL Report September, 2022
BISON Validation to In-Situ Cladding Burst Test and High Burnup LOCA Experiments ORNL Report September, 2022
