Dino Sulejmanovic Contact SULEJMANOVID@ORNL.GOV All Publications The Impact of Europium as a Fission Product Surrogate on Chromium Corrosion in Molten Chloride Salt... Carbon dots from surface-capping/passivation of small carbon nanoparticles with nanoscale titanium dioxide Assessing Stainless Steel Compatibility in Flowing FLiBe Salt Electrochemically Assisted Single Crystal Growth of Reduced Preyssler Polyoxometalates Decorated with M2+ (M = Co, Ni) and Cubane–Like Ni4O4 Units Materials Assessment for FLiBe Fusion Blankets Density Measurements of Molten LiF–BeF2 and LiF–BeF2–LaF3 Salt Mixtures by Neutron Radiography Characterization and Electrochemical Analysis of Acidic Condensate-Induced Corrosion on Aluminized Coating on Steel in Residential Heaters Graphite-Salt Interactions: Summary of FY23 Activities The Dissolution of Cr and Fe at 850°C in FLiNaK and FLiBe A neutron tomography study to visualize fluoride salt (FLiNaK) intrusion in nuclear-grade graphite Measuring the Dissolution of Cr and Fe at 550°-750°C in FLiNaK and FLiBe Methodology for Assessing Stainless Steel Compatibility in Fluoride Salts at 550°-850°C... Be2C synthesis, properties, and ion-beam irradiation damage characterization... Evaluation of Corrosion Behavior of Various Fe- and Ni-Based Alloys in Molten Li2BeF4 (FLiBe)... Characterization of Fe and Cr Dissolution and Reaction Product Formation in Molten Chloride Salts With and Without Impurities... Tribocorrosion of stainless steel sliding against graphite in FLiNaK molten salt Corrosion Testing Trade Study on Testing Methods in Molten Salts Performance of Structural Alloys in Bio-oil Production, Upgrading, and Storage Systems Establishing a Design Strategy for Corrosion Resistant Structural Materials in Molten Salt Technologies Corrosion Compatibility of Stainless Steels and Nickel in Pyrolysis Biomass-Derived Oil at Elevated Storage Temperatures... Assessing Stainless Steel Compatibility in Flowing Fluoride Salts Effect of Carboxylic Acids on Corrosion of Type 410 Stainless Steel in Pyrolysis Bio-Oil Material Selection and Corrosion Studies of Candidate Bearing Materials for Use in Molten Chloride Salt Corrosion of 316H Stainless Steel in Flowing FLiBe (LiF-BeF2) Compatibility of Fuel System Elastomers and Plastics with a Fast-Pyrolysis Oil (Bio-oil) at Room Temperature... Pagination Current page 1 Page 2 Next page ›› Last page Last » Key Links Curriculum Vitae ORCID
News Researchers demonstrate novel technique to observe molten salt intrusion in nuclear-grade graphite
