Chad E Duty UT Faculty with ORNL JFA Contact dutyce@ornl.gov All Publications Recycling of CF-ABS machining waste for large format additive manufacturing Compression and energy absorption characteristics of short fiber-reinforced 2D composite lattices made by material extrusion... Enabling Recycling of Composites: Understanding the Impacts of Multiple Thermal Processing Cycles THE IMPACT OF VISCOSITY ON MATERIAL TRANSITIONS IN LARGE FORMAT ADDITIVE MANUFACTURING OF POLYMER COMPOSITES MEASURING THERMALLY-INDUCED DISTORTION OF LARGE-SCALE COMPOSITE PRINTED STRUCTURES USING DIGITAL IMAGE CORRELATION EVALUATING THE MECHANICAL PROPERTIES WITHIN THE TRANSITION REGION OF MULTI-MATERIAL LARGE-FORMAT EXTRUSION ADDITIVE MANUFACTURING Analysis of Fiber Attrition and Mechanical Performance in Large-Format Additive Manufacturing of Long-Fiber Reinforced Polymer Composites The impact of infill percentage and layer height in small-scale material extrusion on porosity and tensile properties THE IMPACT OF A STATIC-MIXING NOZZLE ON UNIFORMITY IN MATERIAL EXTRUSION LARGE-SCALE ADDITIVE MANUFACTURING RHEOLOGICAL EVALUATION OF PRINTABILITY FOR RECYCLED CARBON FIBER ACRYLONITRILE BUTADIENE STYRENE Anisotropic thermal behavior of extrusion-based large scale additively manufactured carbon-fiber reinforced thermoplastic structures Characterizing The Internal Morphology of Transition Regions in Large-Scale Extrusion Deposition Additive Manufacturing Characterizing material transitions in large-scale Additive Manufacturing Linking thermoset ink rheology to the stability of 3D-printed structures Post-Process Annealing of Large-Scale 3D Printed Polyphenylene Sulfide Composites Geometric Parameter Analysis of Vertically Extruded Pins for Strength Improvement in Additive Manufacturing with Fiber-Reinforced Thermoplastic Rheological behavior of neat and carbon fiber‐reinforced poly(ether ketone ketone) for extrusion deposition additive manufacturing Build orientation, surface roughness, and scan path influence on the microstructure, mechanical properties, and flexural fatigue behavior of Ti–6Al–4V fabricated by electron beam melting Controlling substrate temperature with infrared heating to improve mechanical properties of large-scale printed parts Development of Functionally Graded Material Capabilities in Large-scale Extrusion Deposition Additive Manufacturing CHARACTERIZING THE INFLUENCE OF PRINT PARAMETERS ON POROSITY AND RESULTING DENSITY Microbial Approach to Low-Cost Production of Photovoltaic Nanomaterials Rheological survey of carbon fiber-reinforced high-temperature thermoplastics for big area additive manufacturing tooling applications Analysis on Part Distortion and Residual Stress in Big Area Additive Manufacturing with Carbon Fiber-Reinforced Thermoplastic using Dehomogenization Technique Simulation Assisted Design for an Additively Manufactured Autoclave Tool Accounting for an Anisotropic Expansion Pagination Current page 1 Page 2 Page 3 … Next page ›› Last page Last » Organizations Physical Sciences Directorate Materials Science and Technology Division User Facilities Manufacturing Demonstration Facility
