January 2007

Conference Paper

SPHERICAL INDENTATION OF SiC

By:
Wereszczak, Andrew A; Johanns, Kurt E
Page Number:
43-57
Volume:
27
Issue Number:
7
Book Title:
Ceramic Engineering and Science Proceedings
Publication Date:
January 2007
Conference Name:
30th International Conference and Exposition on Advanced Ceramics and Components
Conference Location:
Cocoa Beach, Florida, United States of America
Conference Sponsor:
American Ceramic Society
Conference Dates:
January 22, 2006 - January 27, 2006

Abstract

Instrumented Hertzian indentation testing was performed on several grades of SiCs and the results and preliminary interpretations are presented. The grades included hot-pressed and sintered compositions. One of the hot-pressed grades was additionally subjected to high temperature heat treatment to produce a coarsened grain microstructure to enable the examination of exaggerated grain size on indentation response. Diamond spherical indenters were used in the testing. Indentation load, indentation depth of penetration, and acoustic activity were continually measured during each indentation test. Indentation response and postmortem analysis of induced damage (e.g., ring/cone, radial and median cracking, quasi-plasticity) are compared and qualitatively as a function of grain size. For the case of SiC-N, the instrumented spherical indentation showed that yielding initiated at an average contact stress 12-13 GPa and that there was another event (i.e., a noticeable rate increase in compliance probably associated with extensive ring and radial crack formations) occurring around an estimated average contact stress of 19 GPa.


Related Researchers