August 2011

Conference Paper

Plasma-surface interactions during tokamak disruptions and rapid shutdowns

By:
Hollmann, E. M.; Arnoux, G.; Commaux, Nicolas J; Eidietis, N. W.; Evans, T.E.; Granetz, R.; Huber, A.; Humphreys, D; Izzo, V.; James, A. N.; Jernigan, Thomas C; Lehnen, M.; Maddaluno, G.; Paccagnella, R.; Parks, P. B.; Phillipps, V.; Reinke, M.; Rudakov, D.L.; Saint-Laurent, F.; Strait, E.; Wesley, J. C.; Wong, Clement; Yu, J.H.
Journal Name:
Journal of Nuclear Materials
Page Number:
27-34
Volume:
45
Issue Number:
1
Publication Date:
August 2011
Conference Name:
19th International Conference on Plasma-Surface Interactions in Controlled Fusion Devices (PSI)
Conference Location:
San Diego, California, United States of America
Conference Sponsor:
Lawrence Livermore National Laboratory
View DOI Listing:
https://doi.org/10.1016/j.jnucmat.2010.10.009

Abstract

Recent progress in understanding of disruptions and in developing methods to avoid disruption damage is presented. Nearly complete mitigation of conducted heat loads has been achieved with high-Z gas jet shutdown. The resulting local radiation heat flash melting in the main chamber might be a concern in ITER, especially with beryllium walls. During the current quench, significant vessel forces can occur due to halo currents I-halo; however, these are found to fall reliably below a boundary of (halo current fraction times halo current peaking factor) <0.7 both experimentally and numerically. Numerical simulations indicate that runaway electrons (REs) could cause serious damage to hard-to reach components in ITER, making their suppression a high priority. During the current quench, less than 20% of the density required for collisional suppression of REs appears to have been achieved. Collisional suppression of REs may have been achieved, however, in full-current RE beams with gas injection. (C) 2010 Elsevier B.V. All rights reserved.