November 2015

Journal

Modeling and testing miniature torsion specimens for SiC joining development studies for fusion

By:
Henager, Charles; Nguyen, Ba; Kurtz, Richard; Roosendaal, T.; Borlaug, B.; Ferraris, Monica ; Ventrella, A.; Kato, Yutai
Journal Name:
Journal of Nuclear Materials
Page Number:
253-268
Volume:
466
Issue Number:
1
Publication Date:
November 2015
View DOI Listing:
https://doi.org/10.1016/j.jnucmat.2015.07.044

Abstract

The international fusion community has designed a miniature torsion specimen for neutron irradiation studies of joined SiC and SiC/SiC composite materials. Miniature torsion joints based on this specimen design were fabricated using displacement reactions between Si and TiC to produce Ti3SiC2 + SiC joints with SiC and tested in torsion-shear prior to and after neutron irradiation. However, many miniature torsion specimens fail out-of-plane within the SiC specimen body, which makes it problematic to assign a shear strength value to the joints and makes it difficult to compare unirradiated and irradiated strengths to determine irradiation effects. Finite element elastic damage and elastic-plastic damage models of miniature torsion joints are developed that indicate shear fracture is more likely to occur within the body of the joined sample and cause out-of-plane failures for miniature torsion specimens when a certain modulus and strength ratio between the joint material and the joined material exists. The model results are compared and discussed with regard to unirradiated and irradiated test data for a variety of joint materials. The unirradiated data includes Ti3SiC2 + SiC/CVD-SiC joints with tailored joint moduli, and includes steel/epoxy and CVD-SiC/epoxy joints. The implications for joint data based on this sample design are discussed. (C) 2015 Elsevier B.V. All rights reserved.


Related Researchers