January 1982

Journal

Equilibrium evolution on the resistive time scale in a tokamak reactor

By:
Holmes, Jeffrey A; Peng, Yueng-Kay M; Rothe, Kristin E
Journal Name:
Journal of Fusion Energy
Page Number:
123
Volume:
2
Issue Number:
2
Publication Date:
January 1982

Abstract

In the Engineering Test Facility (ETF), the plasma pulse duration is expected to be hundreds of seconds, which is comparable to the resistive time scale that governs the resistive diffusion of the equifibrium. The resistive evolution of the safety factor q profile may, for MHD stability reasons, limit the duration of the plasma burn in a tokamak reactor. It may be possible to control this evolution and extend the plasma burn time through proper profile tailoring. We study the evolution of the q profile on the resistive time scale numerically using a one-and-one-half-dimensional (1ı89 single fluid transport code. Two high beta (~r- 7-16%) cases are considered: (a) a beam-driven hydrogen plasma with no nuclear alpha heating for which the beam energy is used as a device to control the temperature profile, and (b) an ignited D-T plasma in which the neutral injection has been turned off. For the beam-driven plasma, it is shown that low beam energy heating profiles lead to resistive steady states having broad temperature profiles and flat q profiles, while high beam energy heating profiles lead to resistive steady states having peaked temperature profiles and deep q profiles. The centralized nuclear heating in an ignited D-T plasma causes the evolution of the q profile for this case to behave much like that in the high energy, beam-driven case: namely, the q values near the plasma center decrease on the resistive time scale until a deep, resistive, steady-state q profile is reached.