August 2019

Journal

Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation

By:
Shyam, Amit ; Roy, Shibayan ; Shin, Dongwon ; Poplawsky, Jonathan D; Allard Jr, Lawrence F; Yamamoto, Yukinori ; Morris, James R; Mazumder, Baishakhi ; Idrobo Tapia, Juan C; Rodriguez, Andres; Watkins, Thomas R; Haynes, James A
Journal Name:
Materials Science and Engineering: A
Page Number:
138279
Volume:
765
Issue Number:
n/a
Publication Date:
August 2019
View DOI Listing:
https://doi.org/10.1016/j.msea.2019.138279

Abstract

Commonly used commercial cast aluminum alloys for the automotive industry are viable for temperatures only up to 250 °C, despite decades of study and development. Affordable cast aluminum alloys with improved high-temperature mechanical properties are needed to enable the next generation of higher efficiency passenger car engines. Metastable θ′ (Al2Cu) precipitates contribute to strengthening in Al–Cu alloys, but above 250 °C coarsen and transform, leading to poor mechanical properties. A major challenge has been to inhibit coarsening and transformation by stabilizing the metastable precipitates to higher temperatures. Here, we report compositions and associated counter-intuitive microstructures that allow cast Al–Cu alloys to retain their strength after lengthy exposures up to 350 °C, ∼70% of their absolute melting point. Atomic-scale characterization along with first-principles calculations demonstrate that microalloying with Mn and Zr (while simultaneously limiting Si to < 0.1 wt %) is key to stabilization of high-energy interfaces. It is suggested that segregation of Mn and Zr to the θ′ precipitate-matrix interfaces provides the mechanism by which the precipitates are stabilized to a higher homologous temperature.