February 2019

Conference Paper

Direct-Write Printed Current Sensor for Load Monitoring Applications

By:
Yu, Yongchao ; Mikkilineni, Aravind K; Killough, Stephen M; Kuruganti, Phani Teja V; Joshi, Pooran C; Hu, Anming
Journal Name:
2019 IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT)
Page Number:
1-6
Issue Number:
ISGT 2019
Book Title:
Proceedings of the 2019 IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT)
Publication Date:
February 2019
Conference Name:
2019 IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT 2019)
Conference Location:
Washington, DC, District of Columbia, United States of America
Conference Sponsor:
IEEE
View DOI Listing:
https://doi.org/10.1109/isgt.2019.8791597

Abstract

We report on a flexible current sensor development employing direct-write printing and additive manufacturing techniques. The integrated current sensor unit incorporates sensing, data processing & storage, and in-field calibration capabilities. A combination of direct-write printing technique and low-temperature curable metallic ink is used to print Ag wires around a 12.5−μm -thick permalloy film. The overall thickness of the polyimide substrate and permalloy sheet remains well-below 500 μm enabling wrap-around sensor functionality. Fused deposition modeling (FDM) additive manufacturing is used to build custom parts for sensor mounting, encapsulation, and an in-field calibration unit using heat and chemical-resistant thermoplastic which responds well to mechanical stress. In the present configuration, the integrated current sensor unit can be powered through USB or 4 AAA batteries to allow data collection and sensor calibration in the field. The flexible current sensor employing a continuous sheet of the permalloy exhibited a well-behaved signal output response at peak current levels exceeding 15A and in the applied ac frequency range of 60 Hz–10 kHz. Overall, the combination of direct-write printing, thin permalloy material, and additive manufacturing technique shows promise for the development of a reconfigurable low-cost current sensor that can be deployed in large numbers at locations of interest to avail the cost and energy-saving opportunities in industrial/commercial and residential applications.


Related Researchers