Abstract
Improvements in determination of the thermal scattering law of moderator materials (measuring, calculating and validating) are important for accurate prediction of neutron thermalization in nuclear systems. In this work a methodology for producing thermal scattering libraries from the experimental data for polyethylene (C2H4)n is discussed. Double differential scattering cross section (DDSCS) experiments were performed at the Spallation Neutron Source of Oak Ridge National Laboratory (SNS ORNL). New scattering kernel evaluations, based on phonon spectrum for (C2H4)n, are created using the NJOY2016 code. Two different methods were used: direct and indirect geometry neutron scattering at ARCS and SEQUOIA, and VISION instruments, respectively, where the phonon spectrum was derived from the dynamical structure factor S(Q,w) obtained from the measured DDSCS. In order to compare and validate the newly created library, the experimental setup was simulated using MCNP6.1. Compared with the current ENDF/BVII.1, the resulting RPI (C2H4)n libraries improved both double differential scattering and total scattering cross sections. A set of criticality benchmarks containing (C2H4)n from HEU-MET-THERM resulted in an overall improved calculation of Keff , although the libraries should be tested against benchmarks more sensitive to (C2H4)n. The DFT + oClimax method is used and is shown to be most comprehensive method for analysis of moderator materials. The importance of DFT + oClimax method lies in the fact that it can be validated against all data measured at VISION, ARCS and SEQUOIA, and experimental total scattering cross section measurements.