December 2017

Conference Paper

Challenges in Making Metal Large-scale Complex Parts for Additive Manufacturing: A Case Study Based on the Additive Manufacturing Excavator (AME)

By:
Nycz, Andrzej ; Noakes, Mark W; Richardson, Bradley S; Messing, Andrew K; Post, Brian K; Paul, Jonathan H; Flamm, Jason; Love, Lonnie J
Page Number:
page 2024-2033
Book Title:
8th Annual International Solid Freeform Fabrication (SFF) Symposium – An Additive Manufacturing Conference Proceeddings
Publication Date:
December 2017
Conference Name:
Solid Freeform Fabrication
Conference Location:
Austin, Texas, United States of America
Conference Sponsor:
National Science Foundation

Abstract

The Additive Manufacturing Excavator (AME) contained several key components that were 3D printed at The Manufacturing Demonstration Facility (MDF) of Oak Ridge National Laboratory (ORNL); it was presented at and performed a live demonstration for the CONEXPO 2017 exhibition in Las Vegas, Nevada in March of 2017. This paper presents challenges in building functional, large-scale metal parts based on a case study of the excavator. The excavator’s metal arm was 3D printed using a modified Wolf Robotics automated metal inert gas (MIG) welding cell. Tasks included designing a new type of slicer for the metal additive manufacturing (AM) process, integrating the slicing software with the Wolf Robotics system, developing the deposition process, characterizing geometric features and material properties, managing heat, designing mechanical components for metal AM, and developing a machining approach to achieve the final part. Two fully functional excavator arms were printed and machined. Integrated hydraulics passageways that also served as structural stiffeners were included in the build for demonstration purposes. As a direct result of this project, Wolf Robotics is now working towards a commercially available large-scale metal AM system.