
Sensor technology for wirelessly gathering basic information in commercial buildings is clearing a path to significant energy savings.
Sponsored by DOE’s Building Technologies Program, ORNL and Pacific Northwest National Laboratory researchers have developed and demonstrated the feasibility of a low-cost wireless sensor system that can quickly notify building owners of problems or opportunities to optimize building energy use.
“The system has the potential to overcome two problems,” said Measurement Science and Systems Engineering Division’s Peter Fuhr, “the high cost of diagnosing building energy losses and equipment inefficiencies, and the tendency to do nothing until absolutely necessary.” Today, Fuhr explained, commissioning, retro-commissioning, and continuous commissioning are common building maintenance strategies. Each can be very expensive, especially if maintenance is neglected until something breaks.

ORNL wireless sensor suitcase used to demonstrate wireless capability in the Alcoa manufacturing plant
To speed detection of energy saving opportunities, researchers created a portable “suitcase” of technologies containing ORNL wireless sensors developed under the DOE Industrial Technologies Program for harsh industrial environments. At about a tenth of the cost of current commercial offerings, the wireless sensors measure parameters such as temperature, humidity, CO2 concentration, lighting level, and power. The suitcase also contains network communication architecture and a laptop interface that is easily deployable in commercial buildings at a fraction of the cost of other building energy management systems.
In June 2011, ORNL deployed the suitcase at the Alcoa Warrick, Indiana, aluminum production facility. Conducting tests over a three day period, the team successfully demonstrated the feasibility of the low-cost wireless system for building energy management.
According to Alcoa’s Ray Chatfield, Alcoa World Alumina Global Energy Management, “These inexpensive DOE-ORNL sensors were up and operational within 30 minutes. We were taking energy-related measurements on the other side of the plant in an electrical substation then relaying the readings across the plant within an hour. This demonstration shows that wireless sensors for energy measurements can be inexpensive, quick to deploy, and work in tough environments.”
In addition to Fuhr, ORNL researchers involved in the project include Computational Sciences and Engineering Division’s Ken Woodworth, MSSED’s David Fugate, and Energy and Transportation Science Division’s Nasr Alkadi.