James Parks II

James E Parks II

Section Head - Energy and Industrial Processes

Contact

865.341.1283 | PARKSJEII@ORNL.GOV

All Publications

State of the Art in Thermal Catalytic Upgrading of Biomass and Biomass-Derived Intermediates...
Influence of loblolly pine anatomical fractions and tree age on oil yield and composition during fast pyrolysis
The effect of air separations on fast pyrolysis products for forest residue feedstocks...
Thermochemical processes for CO 2 hydrogenation to fuels and chemicals: Challenges and opportunities
Effects of including a NOx storage component on a TWC when using a lean spark ignition gasoline engine combined with a passive SCR system
Influence of feedstock variability on thermal decomposition of forest residue in a screw feeder for high temperature conversion
Mechanistic Insights and Rational Design of Ca-Doped CeO2 Catalyst for Acetic Acid Ketonization
The effects of SO2 exposure on three-way catalysts for passive SCR operation
Using Chemical Reactor Models to Predict Fluidized Bed Pyrolysis Yields of Biomass Feedstocks
CFD–DEM modeling of autothermal pyrolysis of corn stover with a coupled particle- and reactor-scale framework
Multiscale CFD simulation of biomass fast pyrolysis with a machine learning derived intra-particle model and detailed pyrolysis kinetics
Predicting thermal excursions during in situ oxidative regeneration of packed bed catalytic fast pyrolysis catalyst
Assessment of a detailed biomass pyrolysis kinetic scheme in multiscale simulations of a single-particle pyrolyzer and a pilo...
Investigating biomass composition and size effects on fast pyrolysis using global sensitivity analysis and CFD simulations
Validation and application of a multiphase CFD model for hydrodynamics, temperature field and RTD simulation in a pilot-scale biomass pyrolysis vapor phase upgrading reactor
Direct Measurement of Ammonia Storage on Passive SCR Systems for Lean Gasoline NOx Reduction Using Radio Frequency Sensing
Passive SCR Performance Under Pseudo-Transient Cycle: Challenges and Opportunities for Meeting Tier 3 Emissions
3D printed structures for optimized carbon capture technology in packed bed columns
Efficient Solar‐Thermal Distillation Desalination Device by Light Absorptive Carbon Composite Porous Foam
Aftertreatment Protocols for Catalyst Characterization and Performance Evaluation: Low-Temperature Oxidation, Storage, Three-Way, and NH3-SCR Catalyst Test Protocols
Engine-Aftertreatment in Closed-Loop Modeling for Heavy Duty Truck Emissions Control
Effects of four-mode hydrothermal aging on three-way catalysts for passive selective catalytic reduction to control emissions from lean-burn gasoline engine
Non-Uniform Cylinder-to-Cylinder Combustion for Ammonia Generation in a New Passive SCR System
Continuous Particulate Filter State of Health Monitoring Using Radio Frequency Sensing
Effects of NOX Storage Component on Ammonia Formation in TWC for Passive SCR NOX Control in Lean Gasoline Engines...

Key Links

ORCID

Organizations