June 1992

Conference Paper

System studies of copperconducting-coil and superconducting-coil pilot plants

By:
Galambos, John D; Peng, Yueng-Kay M
Journal Name:
Fusion Technology
Page Number:
1759
Volume:
21
Issue Number:
3
Publication Date:
June 1992
Conference Name:
10TH TOPICAL MEETING ON THE TECHNOLOGY OF FUSION ENERGY
Conference Location:
Boston, Massachusetts, United States of America

Abstract

The TETRA systems code is used to examine devices with both normal copper and superconducting coils as vehicles for steady-state production of fusion power in a Pilot Plant. If the constraints of plasma ignition and net electrical power production are dropped, such devices are much smaller and less expensive than ITER-like devices. For wall loads near 0.5 MW/m2 with nominal ITER physics guidelines, devices with copper coils have major radii R near 2 m and direct costs near 1 x 10(9) $, while devices with superconducting coils have R = 4.1 m and costs of 2.4 x 10(9) $. However, the copper-coil devices have the burden of hundreds of megawatts of resistive power losses. All cases tend towards high aspect ratio (A > 4), high fields, and low current. The situation improves for the superconducting-coil cases if higher beta limits are permissible, whereas the copper-coil cases see less benefit from higher beta limits.