October 2021

Journal

Post weld heat treatment and operating temperature effect on tribological behavior of laser cladded stellite 21 coating

By:
Roy, Sougata ; Niyanth S, Fnu ; Cakmak, Ercan ; Ghaednia, Hamed; Gangopadhyay, Arup; Qu, Jun
Journal Name:
Wear
Page Number:
203990
Volume:
482-483
Issue Number:
n/a
Publication Date:
October 2021
View DOI Listing:
https://doi.org/10.1016/j.wear.2021.203990

Abstract

This study intends to investigate the feasibility of using laser cladding as a potential process to repair hot working tools by a hardfacing process. A Stellite 21 alloy coating was printed on a 350 maraging steel via laser cladding and the coating microstructure and tribological performance were characterized in as printed conditions and after heat treatment. Such a laser-processed coating showed a high integrity with little porosity and good bonding with the substrate. The Stellite coating produced substantially lower friction and a smoother contact area but had inferior wear resistance compared with the maraging steel substrate. Post process heat treatment at 650 °C for 20 h led to significant amount of strain-induced FCC to HCP phase transformation but had little improvement in wear resistance. Detailed materials characterization using X-ray diffraction and electron microscopy provided fundamental insights to the underlying mechanisms. This study opens the door for future R&D for tool surface repair by laser cladding.


Related Researchers