February 2009

Conference Paper

Oxide Film and Porosity Defects in Magnesium Alloy AZ91

By:
Wang, L; Rhee, Hongjoo; Felicelli, Sergio; Sabau, Adrian ; Berry, John
Page Number:
123-130
Book Title:
Shape Casting: The 3rd International Symposium
Publication Date:
February 2009
Conference Name:
2009 TMS Annual Meeting & Exhibition, Proceedings: Shape Casting: 3rd International Symposium
Conference Location:
San Francisco, California, United States of America

Abstract

Porosity is a major concern in the production of light metal parts. This work aims to identify some of the mechanisms of microporosity formation in magnesium alloy AZ91. Microstructure analysis was performed on several samples obtained from gravity-poured ingots in graphite plate molds. Temperature data during cooling was acquired with type K thermocouples at 60 Hz at three locations of each casting. The microstructure of samples extracted from the regions of measured temperature was then characterized with optical metallography. Tensile tests and conventional four point bend tests were also conducted on specimens cut from the cast plates. Scanning electron microscopy was then used to observe the microstructure on the fracture surface of the specimens. The results of this study revealed the existence of abundant oxide film defects, similar to those observed in aluminum alloys. Remnants of oxide films were detected on some pore surfaces, and folded oxides were observed in fracture surfaces indicating the presence of double oxides entrained during pouring.


Related Researchers