January 2023

Journal

Load shuffling during creep deformation of an additively manufactured AlCuMnZr alloy

By:
Michi, Richard A; Bahl, Sumit ; Fancher, Christopher M; Sisco, Kevin; Allard Jr, Lawrence F; An, Ke ; Yu, Dunji ; Dehoff, Ryan R; Plotkowski, Alexander J; Shyam, Amit
Journal Name:
Acta Materialia
Page Number:
118557
Volume:
244
Issue Number:
1
Publication Date:
January 2023
View DOI Listing:
https://doi.org/10.1016/j.actamat.2022.118557

Abstract

The high-temperature deformation behavior of an additively manufactured Al-Cu-Mn-Zr alloy is evaluated in the as-fabricated and heat-treated states using traditional ex-situ and in-situ neutron diffraction creep experiments performed at 300 °C. The dominant reinforcement phase in the alloy, θ-Al2Cu, despite its high volume fraction of ∼10%, does not provide load transfer strengthening during creep deformation. Instead, the lattice strain evolution suggests a new mechanism we term “load shuffling” wherein the initial load is transferred away from precipitate-free zones along the grain boundaries where most of the θ-Al2Cu particles are located to precipitate-strengthened grain interiors. Notwithstanding the lack of load transfer strengthening, the as-fabricated AM Al-Cu-Mn-Zr alloy still possesses improved creep resistance at 300 °C relative to a cast alloy with similar composition. The proposed load shuffling mechanism explains the lack of observed L12-Al3Zr strengthening at 300 °C and helps identify several strategies for improvement of elevated-temperature mechanical response of AM Al alloys.